Shutdown And Cleanup - Graco RTX2500 Operation, Parts

Shutdown and Cleanup

NOTE: Keep pump and hose clean when
switching between simulated acoustic,
knockdown and orange peel applications. A
dirty pump can release particles of texture
into the finish.
•
To increase pump life, life turn power
OFF when not spraying.
•
Before removing material hose, perform
Pressure Relief Procedure, page 9.
Make certain there is no material in the
hose.
•
To keep sprayer in good operating
condition, always clean it throughly and
prepare it properly for storage.
When you have finished spraying:
1. Open gun air valve.
2. Turn ON/OFF switch to ON position.
ti27380a
3. Close gun air valve.
3A3258H
Shutdown and Cleanup
4. Trigger gun into bucket until most of
texture mix is pumped out.
5. Fill material hopper with 2-4 gallons of
clean water.
ti27341a
ti27346a
ti27383a
ti27381a
17