Advertisement
Quick Links
Instructions- -Parts List
HIGH PRESSURE, MEDIUM VOLUME
"red alert" Filters
For filtration of common industrial paints and coatings in finishing
applications. For professional use only.
3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure
10 gpm (38 liter/min) Flow Capacity
2
36 sq. in. (230 cm
Part No. 210090,
60 mesh (250 micron) element 108116
Part No. 210091,
100 mesh (149 micron) element 108117
Part No. 210092,
200 mesh (74 micron) element 108118
Part No. 104435,
without element
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
) Filtering Area
307252P
EN
03731
Advertisement
Related Manuals for Graco 210090
Summary of Contents for Graco 210090
- Page 1 3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure 10 gpm (38 liter/min) Flow Capacity 36 sq. in. (230 cm ) Filtering Area Part No. 210090, 60 mesh (250 micron) element 108116 Part No. 210091, 100 mesh (149 micron) element 108117 Part No.
- Page 2 WARNINGS High Pressure Spray Can Cause Serious Injury. Observe All Warnings. Read and understand all instruction manuals before operating equipment. SKIN INJECTION HAZARD General Safety Pressure Relief Procedure This equipment is used in a system which generates very high To reduce the risk of serious bodily injury, including fluid injec- fluid pressure.
-
Page 3: Installation
Installation To clean or service the filter without shutting down the system, install a dual filter or a filter bypass system as explained below. The numbers and letters in parentheses refer to Figs. 1, 2, and 3 and the Parts Drawing. Accessories and Technical Data are on the page 5. - Page 4 Service CAUTION drying on the housing (3) and other parts. Install the element with the dome end up. Lubricate the threads of the bowl before If the filter will not be used for a while, thoroughly clean all screwing it into the housing. Tighten it securely. the parts in solvent and blow them dry before the paint dries and clogs the filter.
-
Page 5: Technical Data
Parts Model No. 210090 to 210092 3/4” npt(f) Inlet Includes items 1 to 12. and outlet Model No. 104435 3/4- -16 unf (f) Includes items 1 to 7, 9 to 12; drain port Order the filter element separately from those listed under Ref. No. 8. -
Page 6: The Graco Warranty And Disclaimers
Every form of liability for direct, special or consequential damages or loss is expressly excluded and denied. In no case shall Graco’s liability exceed the amount of the purchase price. Any action for breach of warranty must be brought within two (2) years of the date of sale.