Page 1
® RiverRidge Somerset 2-Door Wall Cabinet ITEM #: 06-039 White ITEM #: 06-078 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children.
Page 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 75 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF OR 75 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST PARTS DESCRIPTION Left Door Right Door Right Side Panel Left Side Panel Cross Bar Shelf Top Board Bottom Board Upper Back Board Middle Back Board Lower Back Board Adjustable Shelf Right Support Board Left Support Board...
Page 5
STEP 1 Attach 1 magnet plate (F) to left door (1) by inserting 1 wood screw (D) through hole on magnet plate (F) and tighten to left door (1). Attach 1 handle (K) to left door (1) by inserting 2 machine screws (J) through holes on left door (1) and tighten to handle (K).
Page 6
STEP 3 Attach right support board (13) to right side panel (3) by inserting wood dowels (A) into dowel holes and cam bolts (B) into cam lock holes on right side panel (3). Insert 3 cam locks (C) into cam lock holes on right side panel (3) and rotate clockwise to secure cam bolts (B) in place.
Page 7
STEP 5 Screw 4 cam bolts (B) into the pre-threaded holes on bottom board (8). Insert 4 wood dowels (A) into dowel holes on bottom board (8). Attach bottom board (8) to left side panel (4) and right side panel (3) by inserting cam bolts (B) and wood dowels (A) into holes on left side panel (4) and right side panel (3).
Page 8
STEP 6 Connect upper back board (9) and middle back board (10) together by sliding into plastic connection strip (N). Attach upper back board (9) and middle back board (10) to cabinet by inserting wood screws (G) through holes on upper back board (9) and middle back board (10), then tighten to cabinet. Attach lower back board (11) to cabinet by inserting wood screws (G) through holes on lower back board (11) and tighten to cabinet.
Page 9
STEP 8 Option #1: Place drawing with hole positions on wall in desired position, screw 2 plastic anchors (L) into wall. Place cabinet against wall, insert 2 screws (M) through holes on cross bar (5) then tighten to plastic anchors (L). Option #2: Place cabinet against wall, insert 2 screws (O) through holes on cross bar (5) then tighten to drywall and wood stud.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth.
Page 11
® Thank you for purchasing this RiverRidge Home item. We hope you ® enjoy it and consider purchasing other RiverRidge items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com ®...
Need help?
Do you have a question about the 06-078 and is the answer not in the manual?
Questions and answers