Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Caraudio-Systems AUX-110
Summary of Contents for Caraudio-Systems AUX-110
- Page 1 AUX-In Interface AUX-110 Audi MMI3G basic/high BMW Professional radio, Business and Professional navigation systems (CCC, CIC) with iDrive, Mercedes Benz Audio5, Audio20, APS50, Comand APS NTG1/NTG2, Porsche PCM 2.0 and 2.1 Version 11.09.2012...
- Page 2 To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. Version 11.09.2012 AUX-110...
- Page 3 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. AUX-110 HW_____ SW_____ 1.2. Check compatibility of vehicle and accessories Requirements Navigation/Radio...
- Page 4 CD changer and integrate Interface according to schema. Obey arrows one the MOST®-connectors as well as the order of components. Connect black wire to ground and red wire to permanent +12V. Isolate blue wire. Black wire Red wire +12V permanent Version 11.09.2012 AUX-110...
- Page 5 In this case a connector bridge for optical wires is necessary. 2.5. Exception: Vehicles without optical lead components Mercedes/Porsche The MOST®-ring (optical) needs to be opened/activated by diagnosis computer. Version 11.09.2012 AUX-110...
- Page 6 3. Operation The AUX-110 emulates a factory CD-changer and is recognized as such by the head-unit. The AUX-input is activated by playing CD1 on the head-unit. Note: On Audi with one factory CD-changer installed, the AUX-110 emulates a second factory CD-changer.
Need help?
Do you have a question about the AUX-110 and is the answer not in the manual?
Questions and answers