Table of Contents
Advertisement
Use this connection when you have a Sony recorder
with either CONTROL L, REMOTE, or LANC @ jack.
After connection, set the switches at the rear of the
RM-E700.
TV or monitor
Connect the TV (or monitor)
to the recorder.
>
Signal flow
10
Connecting cable
video (yellow)
audio L (white)
CONTROL L connecting
audio R (red)
cable (supplied)
to audio/video output
Connecting cable
L (not supplied, page 54)
audio R (red)
audio L (white)
video (yellow)
CONTROL L connecting
cable (supplied)
RECORDER section
PLAYER section
Note on models SLV-50, SLV-70HF, SLV-401 and SLV-
402VPS
When you use the above model for the recorder, the editing
is not possible with the CONTROL L or LANC @ connection.
To edit, use the Connection 2 (Control S connection).
to CONTROL L, REMOTE
or LANC @
i
3
Connect the RM-E700 to the power source.
Do not turn on the power until you finish all the connections.
Doing so, may cause a malfunction.
(supplied)
Set the switches at the rear.
Other switches may be at any position.
A
8
SHUTTLE MODE
When an infrared jog/shuttle remote control unit is not
supplied, or it is not available on option to operate your
video equipment -> Set to A.
When an infrared jog/shuttle remote control unit is
supplied, or it is available on option to operate your
video equipment. — Set to B.
11
Advertisement
Table of Contents
