Table of Contents
Advertisement
Displaying the Stored Title
To Superimpose the Title
Superimposing
Titles in Progr
Let's superimpose the title in PAGE 3 as Cut 2 of the
program, for example.
iN
OUT
IN
OUT
IN
OUT
1
To begin program editing, press the PGM button.
Original tape
Designate the IN and OUT points of Cut 1.
Locate the scene where you want to superimpose the title, and set the player to the playback
pause mode.
Edited tape
Press the ENTRY button.
The IN point of the Cut 2 is designated.
Press the PAGE 3 button.
To insert the titles in the program, designate the desired
For program editing operation, see page 22.
The title in PAGE 3 is superimposed on the playback picture of Cut 2.
|
title while designating Cuts.
To check whether the title was correctly inserted or not,
RN
To insert the titles after designating Cuts, locate the position
Preview the program by pressing PREVIEW button before
3
to insert the title using the <= PGM/PGM => buttons and
pressing the PGM EDIT button.
Press the ENTRY button at the end point of Cut 2.
superimpose the title scrotled.
Note
When a title is superimposed in a Cut, the title appears
Continue designating.
several frames delayed from the designated IN and OUT
points of the Cut.
When you scroll the title
To cancel the title
¢ The title appears and scrolls from the bottom to the center
1 Locate the IN or OUT point of the Cut where the title is
of the screen in a Cut, and then scrolls up from the center
superimposed.
to the top and disappears in the next Cut. For this
2 Press the DISPLAY OFF button.
operation, the 2 Cuts must be a continuous scene.
Designate the OUT point of the Cut where you
To change the title
superimposed the title and the IN point of the next Cut by
1 Locate the IN or OUT point of the Cut where the title is
pressing the ENTRY button twice.
superimposed.
¢ While designating the Cuts, the title does not scroll even
2 Press the PAGE button to be newly designated.
if the SCROLL indication is on the display window.
47
46
Advertisement
Table of Contents
