Advertisement
●
When using this product, please refer to the usage time and operating time in the
specification sheet. ("Specifications" on page 16)
●
After use, be sure to clean this product, especially food contact surfaces.
("Cleaning Method" on page 14)
●
This product is for home use only.
Important information
●
Never place the glass on any heat source or in the microwave.
●
Do not drop this product to avoid damage.
●
Do not use this product outdoors.
● Do not wrap the power cord around the body.
●
Please confirm that the safety device is fixed and installed before use.
●
After making hot food, the glass may be too heavy to pick up with one hand. You can first put on thick
insulated gloves and hold the glass firmly with both hands before pouring the finished product.
●
Do not operate this product without adding ingredients.
● Do not use glass cups to store food or liquids for long periods of time.
●
If not used for a long time, please place this product in a dry and ventilated place to prevent it from getting
damp and moldy.
●
This product can only be used at an altitude below 2,000 meters. Use above an altitude may cause problems
such as undercooked ingredients, overflowing, and smeared ingredients.
Intelligent altitude recognition
●
This function will automatically adapt to the water temperature, altitude and voltage of the area during operation.
Adjust the functional production program to the best state to ensure the full release of nutrients in the ingredients and prevent problems such as
undercooked ingredients, overflowing, and smeared ingredients caused by changes in altitude and voltage.
●
There is a lot of steam during the boiling process, so please be careful to prevent burns.
●
After completing the intelligent altitude recognition, this product has been adjusted to the optimal production program in
the local environment and will continue to operate in this state.
In order to fully ensure the effect of food preparation, before using this product for the first time, or when the product is moved
to an area with large altitude changes.hour , please follow these steps:
1. Add water (do not add any ingredients)
to 1.0L-1.2L water level.
4. Press and hold " " and " at the same time within 30 seconds of power on
key for 3 seconds. After hearing the "beep" sound, click "
Automatically enter intelligent altitude recognition and perform boiling point measurement
Try, the LED displays in a dynamic cycle. and start
Heat water until it boils.
Z50P300_MX-H2201_20221231.indd 5
This symbol means: The surface of the product is hot, please be careful when touching it.
2. Install the glass and lid to
position and put it into the fuselage.
"
"
3. Connect the power supply.
5. After the boiling point determination is completed, the buzzer will sound.
Called, the LED displays the current ambient boiling point,
and back to intelligent altitude recognition, (boiling point
Different values are displayed depending on the altitude).
5
2023/1/5 11:02:13
Advertisement
