Download Print this page

Panasonic MX-H2201 User Manual page 4

Heated wall breaking machine(household use)

Advertisement

Do not move this product by holding the power cord.
Do not place any objects on this product or insert any objects into the bottom/
gaps of the product.
Do not use this product in the following places.
Uneven surfaces, carpets, non-waterproof surfaces or places covered with tablecloths.
Where it may be splashed by water or near a heat source.
Near any open source of water, such as a sink.
● Do not replace any accessories of this product with other parts other than the original
accessories of this product.
Never put your fingers or utensils such as spoons and forks into the glass while the
product is running.
● When adding ingredients to the glass, never exceed the upper limit.
When removing the mixture from the glass, never handle it directly with your hands, but with the help of a
rubber scraper or spatula.
Do not use containers other than those provided with this product for heating.
This product cannot be operated in external timer or external independent remote control system mode.
Do not operate this product when the lid is not properly installed.
Never leave this product while in use.
● During the production process of this product, do not open the lid or disassemble the glass.
To avoid the risk of electric shock, fire, burns, injury or property damage.
● If this product gets stuck during use, please turn off the power immediately, unplug the power
plug and remove the glass, carefully remove the food stuck on the knife, and wait until the
product cools down before continuing to use it.
● When removing ingredients from a glass, never take it directly with your hands. Instead, use an
utensil such as a rubber scraper or spatula.
Be sure to pull out the power plug by holding the power plug and do not pull the power
cord forcefully.
When using, be careful not to step on or trip over the power supply.
When opening the cup lid during or after preparation, please be careful not to be
burned by the steam ejected to avoid accidents.
Only after the cutter has completely stopped can you open the lid or remove the glass from the body.
When this product is not in use, be sure to turn off the power switch and unplug the
power plug from the power socket before installing, disassembling, moving, and
cleaning. The product must be wiped dry before use again.
Please make sure accessories are clean and installed correctly when using this product.
When handling sharp blades, care should be taken during emptying the glass and cleaning, and do not
clean the knives with bare hands.
Please allow this product to cool down before moving, moving or cleaning it.
Please be careful not to tilt the appliance excessively when pouring out ingredients.
4
Z50P300_MX-H2201_20221231.indd 4
Please place this product on a stable, dry, clean, flat and heat-resistant tabletop.
Notice
Things that must be done
2023/1/5 11:02:03

Advertisement

loading