Graco ProMix PD2K Installation Manual page 8

Proportioner for automatic spray applications
Hide thumbs Also See for ProMix PD2K:
Table of Contents

Advertisement

Warnings
TOXIC FLUID
TOXIC
TOXIC
FLUID
FLUID OR
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
• Read Safety Data Sheet (SDS) for handling instructions and to know the specific hazards of
the fluids you are using, including the effects of long-term exposure.
• When spraying, servicing equipment, or when in the work area, always keeps work area
well ventilated and always wear appropriate personal protective equipment. See Personal
Protective
Protective Equipment
Protective
• Store hazardous fluid in approved containers, and dispose of it according to applicable
guidelines.
PERSONAL
PERSONAL
PERSONAL PROTECTIVE
Always wear appropriate personal protective equipment and cover all skin when spraying,
servicing equipment, or when in the work area. Protective equipment helps prevent serious
injury, including long-term exposure; inhalation of toxic fumes, mists, or vapors; allergic
reactions; burns; eye injury and hearing loss. This protective equipment includes, but is not
limited to:
• A properly fitting respirator, which may include a supplied-air respirator, chemically
impermeable gloves, protective clothing and foot coverings as recommended by the fluid
manufacturer and local regulatory authority.
• Protective eyewear, and hearing protection.
EQUIPMENT
EQUIPMENT
EQUIPMENT MISUSE
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated
system component. See Technical
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical
in all equipment manuals. Read fluid and solvent manufacturer's warnings. For complete
information about your material, request SDS from distributor or retailer.
• Do not leave the work area while equipment is energized or under pressure.
• Turn off all equipment and follow the Pressure
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer's replacement parts only.
• Do not alter or modify equipment. Alterations or modifications may void agency approvals
and create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work area.
• Comply with all applicable safety regulations.
8
WARNING
WARNING
WARNING
OR FUMES
OR
FUMES
FUMES
Equipment warnings in this manual.
Equipment
PROTECTIVE EQUIPMENT
PROTECTIVE
EQUIPMENT
EQUIPMENT
MISUSE HAZARD
MISUSE
HAZARD
HAZARD
Technical Data
Technical
Data in all equipment manuals.
Data
Pressure Relief
Relief Procedure
Procedure when equipment is not in use.
Pressure
Relief
Procedure
Personal
Personal
Technical Data
Data
Technical
Data
332458M

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac0500Ac1000Ac2000Ac2002Ac0502Ac1002

Table of Contents