Table of Contents
Advertisement
Quick Links
Instructions–Parts List
STATIONARY AIRLESS PAINT SPRAYER
30:1 President
Used for airless spray application of paints and other coatings from
a 50–gallon drum.
3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Model 231063, Series C
R
Hydra–Spray
R
306706W
04277
Advertisement
Table of Contents
Related Manuals for Graco President Hydra-Spray 231063
Summary of Contents for Graco President Hydra-Spray 231063
- Page 1 Instructions–Parts List STATIONARY AIRLESS PAINT SPRAYER 30:1 President Used for airless spray application of paints and other coatings from a 50–gallon drum. 3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure Important Safety Instructions Read all warnings and instructions in this manual.
-
Page 2: Table Of Contents
Warnings ........Installation Grounding . -
Page 3: Warnings
EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. INSTRUCTIONS D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor. D Do not alter or modify this equipment. - Page 4 SKIN INJECTION HAZARD Spray from the gun, leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. D Fluid injected into the skin might look like just a cut, but it is a serious injury.
- Page 5 FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 6. D If there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately.
-
Page 6: Installation
NOTES: D Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. D Accessories are available from your Graco repre- sentative. If you supply your own accessories, be sure they are adequately sized and pressure-rated to meet the system’s requirements. -
Page 7: Connecting The Unit And Accessories
The installation shown in Fig. 2 is only a guide for selecting and installing system components and accessories. Contact your Graco distributor for assistance in designing a system to suit your particular needs. Connecting the Unit and Accessories D Ground the unit as described in Grounding on page 6. -
Page 8: Operation/Maintenance
Operation/Maintenance Pressure Relief Procedure WARNING SKIN INJECTION HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying accidentally. Fluid under high pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure whenever you... -
Page 9: Starting And Adjusting The Pump
Operation/Maintenance 3. Push in on the air valve knob to lower the elevator, so the cover (A) rests on the top lip of the drum. The support clamp (K) recesses must be tight against the elevator riser tube. The pump intake valve feet (B) must contact and support the perfo- rated plate (9) as shown in Fig. -
Page 10: Parts Drawing
Model 231063, Series C, 30:1 PresidentR Hydra-SprayR 306706 Parts Drawing 43, 44 06218 06218A... -
Page 11: Parts List
Model 231063, Series C, 30:1 PresidentR Hydra-SprayR Ref. Part No. Description 202295 VALVE, push-pull See 306287 for parts. 203743 VALVE, restrictor See 306287 for parts. 204385 ELEVATOR See 306287 for parts. 204940 SWIVEL See 306861 for parts. 204995 AGITATOR See 306459 for parts. 205306 INTAKE SCREEN ASSEMBLY Includes items 6a to 6e. - Page 12 Notes 306706...
-
Page 13: Technical Data
Technical Data Ratio ............. . . Maximum fluid working pressure Maximum air input pressure . -
Page 14: Warranty
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.