Select Pump Expansion Kits; Select Communication Options; Accessory Tool Kit; Upgrade Kit - Graco ProMix PD2K Installation Manual

Configure Your System
7. 7. 7. Select Select Pump Pump Expansion Expansion Kits
Select Pump Expansion
NOTE: NOTE: These are not required for Dual Panel NOTE:
systems since they already include four pumps.
The following table lists available kits to add a third
or fourth pump to your system. Each kit includes
one pump, a pump control module, solenoid,
frame, mounting bracket, and cabling. See the
Pump Expansion Kit manual (332456) for further
information.
Kit Part Kit Kit Part No. Part No. No.
Low Pressure Pressure Pumps
Low Low Pressure
(300 (300 psi (300 psi [2.068 psi [2.068 MPa, [2.068
24R968
24R970
High Pressure Pressure Pumps Pumps (1500
High High Pressure Pumps
MPa, MPa, MPa, 103.4
24R969
24R971
24
Kits
Kits
Kit Kit Description Kit Description Description
Pumps
Pumps
MPa, 20.68 MPa, 20.68 bar]) 20.68 bar]) bar])
Low pressure resin
70cc pump
Low pressure catalyst
35cc pump
(1500 psi psi [10.34 [10.34
(1500 psi [10.34
103.4 103.4 bar]) bar]) bar])
High pressure resin
70cc pump
High pressure catalyst
35cc pump
8. 8. 8. Select Select Communication Communication Options
Select Communication
1. If your application requires integration with a
PLC:
a. 24W829, CGM Kit for PD2K
26A303, CGM Kit for PD2K Dual Panel
26C284, CGM Kit for PD3K+
25D997, CGM Kit for PD2K Dual Panel with
ProfiNet
b. CGMEP0, Ethernet IP
CGMDN0, Device Net
CGMPN0, ProfiNet*
24W462, Modbus TCP
* * * Two CGM modules included with 25D997,
CGM Kit for PD2K Dual Panel with ProfitNet.
2. If your application requires AWI:
a. 24W829, CGM Kit for PD2K
b. 24W462, Modbus TCP**
c. 15V337, AWI Module
NOTE: AWI is not currently available for Dual NOTE: NOTE:
Panel systems.
** ** ** AWI requires its own Modbus TCP module.
If the PLC is also communicating over
Modbus TCP, then two 24W462 modules are
necessary.
9. 9. 9. Accessory Accessory Tool Tool Kit
Accessory Tool
The following kit includes an assortment of tools for
maintenance and repair of the PD2K system.
Kit Kit Kit Part Part Part No. No. No.
25D980
10. 10. Upgrade 10.

Upgrade Kit

Upgrade Kit Kit
The following kit includes software and parts to
upgrade a ProMix PD2K to PD3K+.
Kit Part Part No. No.
Kit Kit Part No.
26C416
Options
Options
Kit
Kit
Kit Kit Description Kit Description Description
PD2K Maintenance
Tool Kit
Kit Description Description
Kit Kit Description
PD3K+ Upgrade Kit
332458M