Changing The Hydraulic Clutch Fluid - KTM 250 EXC 2024 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.44
88

Changing the hydraulic clutch fluid

Warning
Skin irritation Brake fluid is a harmful substance.
–
Keep brake fluid out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
–
Consult a doctor immediately if brake fluid has been swallowed.
–
Rinse the affected area with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
–
If brake fluid spills on to your clothing, change the clothing.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Avoid contact between brake fluid and painted parts. Brake fluid corrodes paint.
E01223-10
H04934-10
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
–
Move the hydraulic clutch fluid reservoir mounted on the han-
dlebar into a horizontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
4
Fill bleeding syringe with the appropriate hydraulic fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove bleeder protection cap,
release the bleeder screw
3
.
p. 159)
5
and mount bleeding syringe
4
.