KTM 250 EXC 2024 Owner's Manual page 60

11 TUNING THE CHASSIS
58
–
Position the handlebar clamp. Mount screws
tighten evenly.
Guideline
Screw, handlebar
clamp
Info
Make sure the installed gaps are even.
(Option: Triple clamp milled)
–
Remove screws
off the handlebar and lay it to one side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables or lines.
–
Remove screws
–
Place the handlebar support in the required position.
Mount and tighten screws
Guideline
Screw, handle-
bar support
Info
Position the handlebar support so that it is even.
–
Position the handlebar.
W00323-10
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp. Mount screws
tighten evenly.
Guideline
Screw, handlebar
clamp
Info
Make sure the installed gaps are even.
M8 20 Nm
(14.8 lbf ft)
1
. Take off the handlebar clamp. Take
2
. Take off the handlebar support.
2
.
M10 40 Nm (29.5 lbf ft)
Loctite
M8 20 Nm
(14.8 lbf ft)
1
and
243™
®
1
and