Table of Contents
Advertisement
6 CONTROLS
6.9
6.10
6.11
18
Stop button
W00296-10
Combination switch
W00016-10
Overview of indicator lights (All EXC models)
E00860-01
1
The stop button
is located on the right side of the handlebar.
Possible states
is in the basic position – In this position,
•
The stop button
the ignition circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit
•
Stop button
is interrupted, a running engine stops, and a non-running
engine will not start.
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when
1
the indicator lamp
ADVANCED – ADVANCED mapping is activated when
2
the indicator lamp
The engine characteristic can be changed using button
2
button
on the combination switch.
Info
If no combination switch is installed, the last selected
mapping is activated.
If a combination switch has never been mounted, the
STANDARD mapping is activated.
Possible states
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected a malfunction in the vehi-
cle electronics. Come safely to a halt, and contact an
authorized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
Turn signal indicator lamp flashes green – The turn
signal is switched on.
The oil level warning lamp lights up red – Oil level has
reached the MINmarking. Ride for no more than until
the remaining fuel in the tank is depleted and at the
next opportunity refuel with 2-stroke oil.
A
lights up.
B
lights up.
1
and
Advertisement
Table of Contents
