Declaration Of Conformity - Salda AKU Operation, Installation & Maintenance Instructions

12. DECLARATION OF CONFORMITY

Manufacturer
SALDA, UAB
Ragainės g. 100
LT-78109 Šiauliai, Lithuania
Tel.: +370 41 540415
www.salda.lt
Hereby confi rms that the following products - Air handling units:
FAN*
(where by "*" indicates possible unit installation type and modifi cation)
Provided it was delivered and installed in the facility in accordance with the included installation instructions, comply with all applicable require-
ments in the following directives and regulations:
Machinery Directive 2006 / 42 / EC
Low Voltage Directive 2014 / 35 / EU
EMC Directive 2014 / 30 / EU
RoHS 2 Directive 2011 / 65 / EU
Energy labeling of residential units Nr. 1254 / 2014
Ecodesign requirements for ventilation units Nr. 1253 / 2014
The following harmonized standards are applied in applicable parts:
EN ISO 12100:2012 - Safety of machinery - General principles for design - Risk assessment and risk reduction.
EN 60335-1:2012 - Household and similar electrical appliances. Safety. Part 1: General requirements.
EN 60529:1999/A2:2014/AC:2019 - Degrees of protection provided by enclosures (IP code).
EN 60204-1:2018 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements.
EN IEC 61000-6-1:2019-03 - Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and
light-industrial environments.
LST EN 61000-6-2:2019 - Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial environments.
LST EN 61000-6-3:2008 - Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and
light-industrial environments.
Should any alterations be made in the products, this declaration will no longer apply.
Quality: SALDA UAB activities are in line with the international quality management system standard ISO 9001:2015.
Date 2022-02-02
Giedrius Taujenis
Director product development
50 | EN FANS v2024.1