Salda AKU Operation, Installation & Maintenance Instructions page 28

VSA 3.0 / VSA EKO
• The device is mounted onto the chimney using accessories: reverse thrust valves, flexible connectors, and connection flanges. They have to
be installed only as shown in
• The power supply cord has to be pushed through a plastic tube inside the chimney and connected to the fan.
• Attach the fan to the roof chimney.
• The roof fan is attached to the chimney using screws. It is necessary to use rubber gaskets.
• When the fan is attached to the chimney, put back the fan cover and screw it with four (4) screws.
Fig. 5.5.21 Mounting and installation
using accessories
VSV / VSV EKO AL / VSVI EKO AL
• The device is mounted onto the chimney using accessories: reverse thrust valves, flexible connectors, and connection flanges. They have to
be installed only as shown in
• The power supply cord has to be pushed through a plastic tube inside the chimney.
• Attach the fan to the roof chimney.
• The roof fan is attached to the chimney using screws. It is necessary to use rubber gaskets.
• When the fan is attached to the chimney, put back the fan cover and screw it in with screws.
Fig. 5.5.23 Mounting and installation using accessories
28 | EN
Fig. 5.5.21.
Fig. 5.5.23.
Fig. 5.5.22 Mounting
Fig. 5.5.24 Cover opening
FANS v2024.1