Table of Contents
Advertisement
PROGRAM
FOR
SWITCHING OFF OF ONE COOKING
ZONE
This function permits to set a timer from "
99
to "
" minutes for automatic turning Off of
the cooking zone/s.
•
Select the cooking zone and set the
desired power level.
•
Press the key
signal (beep) will sound and the timer
display shows "
cooking zone will show "
•
Within 5 seconds, set the timer by using
the timer keys
reduce the value.
By pressing the key
is "
" .
1
By pressing the key
is "
".
99
If the selected time is "
is switched off automatically after 5
seconds, while the zone stays on.
•
The time can be changed at any time
following the same procedure here
above indicated (selecting previously
the cooking zone if more than one zone
is operating).
•
To program another cooking zone,
repeat as described above.
NOTE: The led indicating the cooking
zone closest to the end of the
program, is lighted. In the case of
one programmed zone only, the led is
always lit.
Now the program for automatic switching
Off is complete.
At the end of the countdown the cooking
zone will switch off automatically, an
acoustic signal (beep) will sound (for one
00
minute only), "
" will show on the timer
display and the cooking zone display will
show "
" (timer).
Press the key
to reset the timer.
Note: The program for automatic switch off
can be cancelled at any time by resetting
00
the timer to "
" As an alternative, press
the key
and keys
time (selecting previously the cooking zone
if more than one zone is operating).
AUTOMATIC
(timer); an acoustic
00
". The display of the
" (timer).
or
to increase or
the initial value
the initial value
00
", the timer
,
at the same
1
"
OR
O
23
23
Advertisement
Table of Contents
