Instrument Cluster Display Location And Controls; Warning Lights And Messages - Jeep WRANGLER 2024 Owner's Handbook Manual

Hide thumbs Also See for WRANGLER 2024:
Table of Contents

Advertisement

1.
Tachometer:
Indicates the engine speed in revolutions per
minute (RPM x 1000).
2.
Engine Coolant Temperature:
This gauge shows the engine coolant
temperature. The gauge pointer will likely
show higher temperatures when driving in
hot weather, up mountain grades, or in heavy
stop and go traffic. If the red Warning Light
turns on while driving, safely bring the
vehicle to a stop, and turn off the engine. DO
NOT operate the vehicle until the cause is
corrected.
3.
Instrument Cluster Display:
The instrument cluster display features a
driver interactive display. When the
appropriate conditions exist, this display
shows messages.
4.
Fuel Gauge:
The pointer shows the level of fuel in the fuel
tank when the ignition is in the ON/RUN
position.
The fuel pump symbol points to
the side of the vehicle where the
fuel door is located.
5.
Power/Charge Gauge:
This gauge represents the source of the
power utilized to accelerate the vehicle.
INTERIOR
20
The green outer ring represents the High
Voltage (HV) battery output during
acceleration and input power during
regeneration.
I
C
D
NSTRUMENT
LUSTER
ISPLAY
L
A
C
OCATION
ND
ONTROLS
The instrument cluster display is located in the
center of the instrument cluster.
The system allows the driver to select
information by pushing the instrument cluster
display control buttons located on the left side
of the steering wheel.
Instrument Cluster Display Control Buttons
Left Arrow Button
Push and release the left
arrow button to
access the information screens or submenu
screens of a main menu item.
Up Arrow Button
Push and release the up
arrow button to
scroll upward through the Main Menu items.
Right Arrow Button
Push and release the right
arrow button to
access the information screens or submenu
screens of a main menu item.
Down Arrow Button
Push and release the down
arrow button to
scroll downward through the Main Menu items.
OK Button
Push the OK button to access/select the
information screens or submenu screens of a
Main Menu item. Push and hold the OK arrow
button for two seconds to reset displayed/
selected features that can be reset.
W
L
A
M
ARNING
IGHTS
ND
ESSAGES
These symbols are Warning/Indicator lights that
illuminate to signify various conditions with your
vehicle, ranging from potentially critical faults to
merely informing you that a feature has been
engaged. Warning and Indicator Lights are
different based upon equipment options and
current vehicle status. Some telltales are
optional and may not appear.
NOTE:
For more information about warning lights,
indicators and messages (including "service
transmission") please see your owners manual.

Advertisement

Table of Contents
loading

Table of Contents