Instrument Cluster Display Location And Controls; Warning Lights And Messages - Jeep Wrangler 2024 Owner's Handbook Manual

Hide thumbs Also See for Wrangler 2024:
Table of Contents

Advertisement

1. Tachometer
○ Indicates the engine speed in revolutions
per minute (RPM x 1000).
2. Engine Coolant Temperature
○ This gauge shows the engine coolant tem-
perature. The gauge pointer will likely show
higher temperatures when driving in hot
weather, up mountain grades, or in heavy
stop and go traffic. If the red Warning Light
turns on while driving, safely bring the
vehicle to a stop, and turn off the engine.
DO NOT operate the vehicle until the cause
is corrected.
3. Instrument Cluster Display
○ The instrument cluster display features a
driver interactive display. When the appro-
priate conditions exist, this display shows
messages.
4. Fuel Gauge
○ The pointer shows the level of fuel in the
fuel tank when the ignition is in the
ON/RUN position.
○ The fuel pump symbol points to
the side of the vehicle where the
fuel door is located.
5. Power/Charge Gauge
○ This gauge represents the source of the
power utilized to accelerate the vehicle. The
green outer ring represents the High Volt-
age (HV) battery output during accelera-
tion and input power during regeneration.
INSTRUMENT CLUSTER
DISPLAY LOCATION AND
CONTROLS
The instrument cluster display is located in the
center of the instrument cluster.
The system allows the driver to select informa-
tion by pushing the instrument cluster display
control buttons located on the left side of the
steering wheel.
Instrument Cluster Display Control Buttons
Left Arrow Button
Push and release the left
arrow button to
access the information screens or submenu
screens of a main menu item.
Up Arrow Button
Push and release the up
arrow button to
scroll upward through the Main Menu items.
Right Arrow Button
Push and release the right
access the information screens or submenu
screens of a main menu item.
Down Arrow Button
Push and release the down
scroll downward through the Main Menu items.
OK Button
Push the OK button to access/select the infor-
mation screens or submenu screens of a Main
Menu item. Push and hold the OK arrow button
for two seconds to reset displayed/selected
features that can be reset.
WARNING LIGHTS AND
MESSAGES
These symbols are Warning/Indicator lights that
illuminate to signify various conditions with your
vehicle, ranging from potentially critical faults to
merely informing you that a feature has been
engaged. Warning and Indicator Lights are differ-
ent based upon equipment options and current
vehicle status. Some telltales are optional and
may not appear.
NOTE:
For more information about warning lights and
indicators, please see your owners manual.
INTERIOR
arrow button to
arrow button to
21

Advertisement

Table of Contents
loading

Table of Contents