E-Save; Charge Settings - If Equipped - Jeep WRANGLER 2024 Owner's Handbook Manual

Hide thumbs Also See for WRANGLER 2024:
Table of Contents

Advertisement

Climate Schedule
Schedule Bypass
NOTE:
If the vehicle is turned off outside of the
charging window, a radio pop-up message will
be displayed. The pop-up message asks the
driver if they would like to "Charge Now?" and
provides the next charging schedule start time
and estimated time to charge the battery to
100%. To fully deactivate the charge schedule,
select the "Enable Schedule" checkbox until the
check mark is removed from the box.
The charging schedule can also be overridden
if the EVSE is plugged in, unplugged, and then
plugged in a second time to the vehicle.
EXTERIOR
56
-S
E
AVE
The fourth screen within the Hybrid Electric App
is the e-Save screen. From this screen, you can
specify the behavior of the e-Save drive mode:
e-Save Screen
Battery Save - Maintains the high voltage
State of Charge (SOC) at its current level
under most driving scenarios.
Battery Charge - Uses additional power from
the gas engine to increase the high voltage
SOC, up to 40%, 60%, or 80% capacity.
C
S
— I
E
HARGE
ETTINGS
F
The fifth screen within the Hybrid Electric App is
the Charge Setting screen. From this screen, you
can select the rate at which your vehicle
charges.
The Charge Setting can be adjusted by pressing
the "+" or "-" buttons, and the estimated time
until full charge will update on the right side of
the screen to reflect the selected Charge
Setting.
QUIPPED

Advertisement

Table of Contents
loading

Table of Contents