Table of Contents
Advertisement
Power Box
Please read all Cautions and Safety procedures
within these Power Box instructions before
operating.
Power Box
EXTERIOR
46
1 — Power Outlet
2 — Power Indicator Light
3 — Vehicle Indicator Light
4 — AC On Button
5 — USB-C Port
NOTE:
●
The USB-C port is used to charge the Power
Box internal battery and does not offer
external charging capabilities.
●
The Power Box cannot be used to charge
other vehicles.
Getting Started
The Power Box provides maximum flexibility
using the high voltage system under three
modes of operation:
Battery Mode
Battery Mode uses the vehicle's battery to
supply power to the Power Box without running
the engine. It is great for an overnight camping
trip!
Generator Mode
Generator Mode will run the engine to recharge
the vehicle's battery and power the Power Box.
It'll keep the vehicle battery charge if you want
to use all-electric driving later.
Blended Mode
Blended Mode will use the engine and battery to
power the Power Box. It is very efficient and will
keep your Power Box going for the longest time.
It is great when you are using the Power Box for
a long time.
Press the Max Regeneration button to set the
vehicle to Blended Mode.
Powering On The Power Box
Follow these steps to power on the Power Box.
1.
Set the Ignition in either ACC or RUN
(engine running or not running).
2.
Connect the Power Box electric plug to the
vehicle.
3.
Push the Power Box AC On button.
You can keep the vehicle off while using the
Power Box.
CAUTION!
Power off and disconnect the Power Box if any
electrical equipment/appliance has a strange
odor, or begins to smoke while the equipment
or appliance is powered ON or operating.
Advertisement
Table of Contents
