Jeep WRANGLER 2024 Owner's Handbook Manual page 28

Hide thumbs Also See for WRANGLER 2024:
Table of Contents

Advertisement

A/C Button
Push the button to engage the Air
Conditioning (A/C) system.
Recirculation Button
Push the button to change the system
between Recirculation mode and
outside air mode.
Auto Button
Push the button after setting your
desired temperature and the system
will maintain the set temperature.
Front Defrost Button
Push the button to change the current
airflow setting to Defrost mode.
Rear Defrost Button
Push the button to turn on the rear
window defroster and heated mirrors.
INTERIOR
26
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild washing
solution, wiping parallel to the heating
elements. Labels can be peeled off after
soaking with warm water.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
Driver And Passenger
Temperature Controls
Push the driver or passenger's side tog-
gle switch upward or downward, or
slide the temperature bar to adjust the
driver and passenger temperature set-
tings.
SYNC Button
Press the SYNC button on the
touchscreen to synchronize the driver
and front passenger temperature
settings.
Blower Control
Use the small or large blower icon
toggle switches or the blower bar
on the touchscreen to increase or
decrease the amount of air forced
through the climate control system.
Mode Control
Select Mode by pressing one of the
Mode buttons on the touchscreen, or
the faceplate, to change the airflow
distribution mode.
Panel Mode
Bi-Level Mode
Floor Mode

Advertisement

Table of Contents
loading

Table of Contents