Table of Contents
Advertisement
The Keyless Push Button Ignition has several
operating modes that are labeled and will
illuminate when in position. These modes are
OFF, ACC, RUN, and START.
If the vehicle's ignition is in either ACC or RUN,
the vehicle charge indicator may not display a
value greater than 99% state of charge due to
vehicle loads.
OFF
●
The engine is stopped.
●
Some electrical devices (e.g. power locks,
alarm, etc.) are still available.
ACC
●
Some electrical devices are available (e.g.
power windows).
●
Mechanical power (vehicle propulsion) is not
available.
RUN
●
Driving position.
●
All electrical devices are available (e.g. climate
controls, heated seats, etc.).
●
As long as READY appears in the instrument
cluster display, it does not matter if the
engine is running or not, vehicle propulsion is
available.
START
●
The engine will start.
NOTE:
Vehicle propulsion is only available after the
vehicle has passed through the START position.
WARNING!
●
When exiting the vehicle, always remove
the key fob from the vehicle and lock your
vehicle.
●
Never leave children alone in a vehicle, or
with access to an unlocked vehicle.
●
Allowing children to be in a vehicle
unattended is dangerous for a number of
reasons. A child or others could be seriously
or fatally injured. Children should be warned
not to touch the parking brake, brake pedal
or the gear selector.
●
Do not leave the key fob in or near
the vehicle, or in a location accessible to
children, and do not leave the ignition of
a vehicle equipped with Keyless Enter 'n
Go™ in the ON/RUN position. A child could
operate power windows, other controls, or
move the vehicle.
●
Do not leave children or animals inside
parked vehicles in hot weather. Interior heat
buildup may cause serious injury or death.
●
An unlocked vehicle is an invitation for
thieves. Always remove key fob from the
vehicle and lock all doors when leaving the
vehicle unattended.
●
Do not press the mechanical key against the
Keyless Push Button Ignition.
●
Do not use sharp metal objects (e.g.
screwdriver etc.) to pry the button out of
the ignition switch. This button comes as
an assembly, and is not removable. This can
(Continued)
damage the silicone shield.
WARNING!
CAUTION!
INTERIOR
11
Advertisement
Table of Contents
