Introduction; Areas Of Application - Parkside PTPK 400 B1 Translation Of The Original Instructions

Content
Introduction ...............................19
Areas of Application ..................19
General Description ....................20
Scope of Delivery ............................20
Overview .......................................20
Functional description ......................20
Technical Data ............................20
Performance data ............................20
Notes on Safety .........................21
Explanation of symbols ....................21
Special instructions for safe
operating .......................................21
General notes on safety ...................22
Operational start-up ..................24
Assembly .......................................24
Connection of the pressure line .........24
To erect/suspend ............................24
Controls before operational start-up ...25
Operation ..................................25
Mains connection ............................25
Switching on and off .......................25
Automatic mode..............................25
Manual mode/fl at suction ................26
Maintenance and Cleaning .........26
General cleaning instructions ............27
To replace the backfl ow stop ............27
Storage ......................................27
Waste Disposal and
Environmental Protection ...........27
Replacement parts/Accessories ..28
Guarantee .................................29
Repair Service ............................30
Service-Center ............................30
Importer ....................................30
Troubleshooting .........................31
Translation of the original
EC declaration of conformity ....222
Exploded Drawing ...................237

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a fi nal inspection. The functionality of your
equipment is therefore guaranteed. It can-
not be ruled out that residual quantities of
water will remain on or in the equipment/
hose lines in isolated cases. This is not a
fault or defect and it represents no cause
for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use and
disposal. Before using the product, famil-
iarise yourself with all of the operating and
safety instructions. Use the product only as
described and for the applications speci-
fi ed. Keep this manual safely and in the
event that the product is passed on, hand
over all documents to the third party.

Areas of Application

The submersible water pump acquired by
you is designed for pumping water with a
maximum temperature of 35°C.
This pump can be used e.g. to empty ba-
sins and tanks.
The pump is not suitable for commercial
use. Commercial use will invalidate the
guarantee.
The operator or user is responsible for ac-
cidents or damage to other people or their
property. The manufacturer shall not be
liable for damages caused by use other
than for which the equipment is intended
or by incorrect operation.
GB MT
19