Table of Contents
Advertisement
RANGER AIR 260MPX
®
WIRELESS REMOTE CONTROL
The Ranger Air comes with a basic wireless remote control to
turn the engine on/off.
To operate:
Place the OFF/AUTO/RUN/START switch in either AUTO
or RUN.
Press and release the remote button 3 times within a
10 second period to start the engine.
Press and release the remote button 3 times within a
10 second period to stop the engine.
103
psi
If the remote fob is not available, the engine may be started or
stopped by pressing the ENGINE button on the user interface or
by using the STOP/AUTO/RUN/START switch.
Pairing The Remote
The key fob comes paired to the machine from the factory. If the
fob is lost and a new fob needs to be paired to the transmitter, use
the following procedure:
1. Turn the machine OFF.
2. Remove the rear roof.
3. Remove the case back.
4. Remove the cover for the radio receiver box.
5. Start the machine.
6. Press and release the button on the radio receiver box (3) times.
The receiver will beep.
7. Press the button on the key fob. The receiver will beep.
8. Turn the machine OFF.
9. Reassemble the radio receiver box cover.
10. Reassemble the case back and rear roof.
Engine Button
B-20
OPERATION
Advertisement
Table of Contents
