Crosslinc - Lincoln Electric Ranger Air 260MPX Operator's Manual

RANGER AIR 260MPX
®

CROSSLINC

The accessory or wire feeder talks to the power source by sending
signal through the electrode cable.
To start CrossLinc, simply connect the weld cables and sense lead
per the CrossLinc device's instructions. Select the desired weld
mode with the Ranger Air. When weld output is ON, the CrossLinc
device will automatically link to the Ranger Air. The CrossLinc icon
will appear on the screen to show active communication.
When CrossLinc is active, the remote control (6 pin) and wireless
remote control is disabled.
103
psi
CrossLinc
icon
B-7
OPERATION