Lincoln Electric Ranger Air 260MPX Operator's Manual page 36

RANGER AIR 260MPX
®
4. Press the knob to indicate the vehicle is ready for
jump assist.
5. The Ranger will attempt to regulate the battery
voltage to 14V. Attempt to start to the vehicle. The
Ranger will remain in a jump assist state for up to 10
minutes.
103
psi
Attempt to start the vehicle.
14.0
F
E ½
6. The Ranger will supply 260 amp jump assist
current. The current will automatically be reduced
when the Ranger senses the battery voltage
increasing as the engine starts.
7. Press the knob, Home button or Back button to
stop jump assist at any time.
---
12V Lead Acid
E F
½
Rotate clockwise
To turn output ON
Ba ery Charge
V
Press knob to continue
Ba ery Jump Assist
260
A
12.0
V
OFF
Output
B-15
OPERATION