Lincoln Electric AC-225-S Operator's Manual

Lincoln Electric AC-225-S Operator's Manual

For use with machines having code numbers: 10420, 10421, 10422, 10423, 10424, 11074, 11602, 11603, 11604, 11674, 11675
Hide thumbs Also See for AC-225-S:
Table of Contents

Advertisement

Available languages

Available languages

Operator's Manual
AC-225-S & AC/DC 225/125
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
IMT237-P
| Issue D ate Nov-13
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
10420, 10421, 10422,
10423, 10424, 11074,
11602, 11603, 11604,
11674, 11675

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC-225-S and is the answer not in the manual?

Questions and answers

Summary of Contents for Lincoln Electric AC-225-S

  • Page 1 Operator’s Manual AC-225-S & AC/DC 225/125 For use with machines having Code Numbers: 10420, 10421, 10422, 10423, 10424, 11074, 11602, 11603, 11604, 11674, 11675 Register your machine: www.lincolnelectric.com/register Authorized Service and Distributor Locator: www.lincolnelectric.com/locator Save for future reference Date Purchased...
  • Page 2 THANK YOU FOR SELECTING A QUALITY PRODUCT BY KEEP YOUR HEAD OUT OF THE FUMES. DON’T get too close to the arc. LINCOLN ELEC TRIC. Use corrective lenses if necessary to stay a reasonable distance away from the arc. READ and obey the Safety Data PLEASE EXAMINE CARTON AND EQUIPMENT FOR Sheet (SDS) and the warning label DAMAGE IMMEDIATELY...
  • Page 3: Section A: Warnings

    W117.2-1974. A Free copy of “Arc Welding Safety” booklet E205 is available from the Lincoln Electric Company, 2.d. All welders should use the following procedures in order to 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199.
  • Page 4: Electric Shock Can Kill

    SAFETY ELECTRIC SHOCK ARC RAYS CAN BURN. CAN KILL. 3.a. The electrode and work (or ground) circuits are 4.a. Use a shield with the proper filter and cover plates to protect your electrically “hot” when the welder is on. Do eyes from sparks and the rays of the arc when welding or not touch these “hot”...
  • Page 5 SAFETY WELDING AND CUTTING CYLINDER MAY EXPLODE IF SPARKS CAN CAUSE DAMAGED. FIRE OR EXPLOSION. 7.a. Use only compressed gas cylinders containing the correct shielding gas for the process used 6.a. Remove fire hazards from the welding area. If and properly operating regulators designed for this is not possible, cover them to prevent the welding sparks the gas and pressure used.
  • Page 6 AC-225-S & AC/DC 225/125 TABLE OF CONTENTS...
  • Page 7: Attaching Electrode Cable To Holder

    AC-225-S & AC/DC 225/125 INSTALLATION OPERATING Attaching Electrode Cable to Holder INSTRUCTIONS WARNING Before attaching the electrode cable to the electrode holder or the work cable to clamp, be certain the welder is turned off or the input power is disconnected.
  • Page 8 AC-225-S & AC/DC 225/125 INSTALLATION 6. Slide handle into position and secure by turning the locking Attaching Work Cable to Clamp screw in until it is tight. The threaded end of the screw will Insert work cable (with 5/16” clearance hole terminal) through strain...
  • Page 9: Welding Current Selection

    AC-225-S & AC/DC 225/125 OPERATION Welding Current Selection Electrode Selection Guide Each position on the current selector switch is marked with the See the following Electrode Selection Guide and additional electrode output amperes for that setting. Turn the switch to the current selection information.
  • Page 10 AC-225-S & AC/DC 225/125 OPERATION In Addition to the Electrodes Listed Above the ones listed below may also be used. To determine the correct electrode diameter and current settings to use please consult the Lincoln Weldirectory (Bulletin #C2.10) • Fleetweld® 35 •...
  • Page 11 AC-225-S & AC/DC 225/125 OPERATION Cutting (Do not exceed the Duty Cycle — At the beginnig of this Operation Section) The arc welder and the electrode can be used for cutting steel and cast iron. Follow this procedure: 1. Use 1/8” (3.2mm) or 5/32" (4.0mm) Fleetweld 180 electrode.
  • Page 12 AC-225-S & AC/DC 225/125 MAINTENANCE MAINTENANCE Routine preventative maintenance is not required. See your local Lincoln Electric Authorized Field Service Shop for neces- sary repairs.
  • Page 13: Manual Del Operador

    Manual del Operador AC-225-S y AC/DC 225/125 Para usarse con máquinas con números de código: 10420, 10421, 10422, 10423, 10424, 11074, 11602, 11603, 11604, 11674, 11675 Registre su máquina: www.lincolnelectric.com/register Servicio Autorizado y Localizador de Distribuidores: www.lincolnelectric.com/locator Guarde para consulta futura Fecha de Compra Código: (ejemplo: 10859)
  • Page 14 GRACIAS POR ADQUIRIR UN NO SE ACERQUE AL HUMO. PRODUCTO DE PRIMERA NO se acerque demasiado al arco. CALIDAD DE LINCOLN Si es necesario, utilice lentillas para ELEC TRIC. poder trabajar a una distancia razonable del arco. LEA y ponga en práctica el contenido de las hojas de datos sobre seguridad y el de las COMPRUEBE QUE LA CAJA Y EL EQUIPO ESTÉN...
  • Page 15 E205, “Seguridad en los procesos de soldadura por 2.c. La exposición a los campos EM de la soldadura podría tener arco”, en Lincoln Electric Company, situada en 22801 St. Clair otros efectos sobre la salud que aún se desconocen.
  • Page 16 SEGURID D UNA DESCARGA LAS RADIACIONES ELÉCTRICA LE PUEDE DEL ARCO QUEMAN. MATAR. 4.a. Utilice un protector con el filtro y las cubiertas debidos para protegerse los ojos de las chispas 3.a. Los circuitos auxiliar (tierra) y del electrodo y de las radiaciones del arco cuando esté soldando están vivos desde el punto de vista u observando una soldadura por arco.
  • Page 17 SEGURID D LAS CHISPAS SI SE DAÑAN, LAS BOMBONAS DERIVADAS DE PUEDEN EXPLOTAR. CORTES 7.a. Utilice únicamente bombonas de gas Y SOLDADURAS comprimido que contengan los gases de PUEDEN PROVOCAR protección adecuados para el proceso en cuestión, así como reguladores diseñados INCENDIOS O EXPLOSIONES.
  • Page 18 AC-225-S & AC/DC 225/125 TABLA DE CONTENIDO...
  • Page 19: Instrucciones De Operación

    AC-225-S & AC/DC 225/125 INSTALACIÓN INSTRUCCIONES DE OPERACIÓN ADVERTENCIA ADVERTENCIA Orificio Superior con Cable Más Largo • Haga que un electricista instale y dé servicio a este equipo. Cable del Electrodo • Apague la alimentación en la caja de fusibles antes de traba- jar en este equipo.
  • Page 20 AC-225-S & AC/DC 225/125 INSTALACIÓN 6. Deslice la manija en posición y asegure girando el Conexión del Cable de Trabajo a la Pinza tornillo de fijación hasta que esté apretado. El lado Inserte el cable de trabajo (con terminal de orificio de roscado del tornillo pasará...
  • Page 21: Selección De La Polaridad De Soldadura

    AC-225-S & AC/DC 225/125 OPERACIÓN Selección de la Polaridad de Soldadura Selección de Electrodos A fin de obtener los mejores resultados con los electrodos de ¿Cuál electrodo es el mejor para un trabajo en particular?. . soldadura de arco de hoy en día, es importantes utilizar la polaridad .¿cómo utilizarlo? Estas son preguntas importantes porque el...
  • Page 22: Guía De Electrodos

    AC-225-S & AC/DC 225/125 OPERACIÓN GUÍA DE ELECTRODOS Además de los electrodos antes mencionados, también es posible utilizar los que se enumeran a continuación. A fin de determinar el diámetro correcto de un electrodo y los parámetros de corriente a utilizar, consulte el Lincoln Weldirectory (Boletín #C2.10) •...
  • Page 23 AC-225-S & AC/DC 225/125 OPERACIÓN Corte (no exceda el ciclo de trabajo — al inicio de esta sección de operación) La soldadora de arco y electrodo se pueden utilizar para cortar acero y hierro fundido. Siga este procedimiento: 1 Utilice un electrodo Fleetweld 180 de 3.2mm (1/8”) ó...
  • Page 24: Mantenimiento

    AC-225-S & AC/DC 225/125 MANTENIMIENTO MANTENIMIENTO No es necesario un mantenimiento preventivo de rutina. Acuda a su Taller de Servicio Autorizado de Campo de Lincoln Electric local para las reparaciones necesarias.
  • Page 25 Manuel de l’Opérateur AC-225-S et AC/DC 225/125 Pour utilisation avec les machines ayant les Numéros de Code: 10420, 10421, 10422, 10423, 10424, 11074, 11602, 11603, 11604, 11674, 11675 Pour enregistrer la machine : www.lincolnelectric.com/register Recherche d’Atelier de Service et Distributeur Agréés: www.lincolnelectric.com/locator...
  • Page 26 MERCI D’AVOIR SÉLEC- TIONNÉ UN PRODUIT DE QUALITÉ DE MAINTENEZ VOTRE TÊTE À L’ÉCART DE LA FUMÉE. LINCOLN ELEC TRIC. NE PAS trop s’approcher de l’arc. Utiliser des verres correcteurs si nécessaire afin de rester à une distance raisonnable de l’arc. LIRE et se conformer à...
  • Page 27 E205 « Sécurité au soudage à l’arc » est disponible 2.b. Les CEM peuvent interférer avec certains pacemakers, et les auprès de Lincoln Electric Company, 22801 St. Clair Avenue, soudeurs portant un pacemaker doivent consulter un médecin Cleveland, Ohio 44117-1199.
  • Page 28 SÉ URITÉ UNE DÉCHARGE LES RAYONS DE L'ARC ÉLECTRIQUE PEUT TUER. PEUVENT BRÛLER 3.a. Les circuits d’électrode et de retour (ou de 4.a. Utiliser un masque avec le filtre et les protège-lentilles appropriés terre) sont électriquement « chauds » lorsque pour protéger vos yeux contre les étincelles et les rayons de l’arc la machine à...
  • Page 29 SÉ URITÉ LE SOUDAGE ET LES LA BOUTEILLE PEUT EXPLOSER ÉTINCELLES DE SI ELLE EST ENDOMMAGÉE COUPAGE PEUVENT 7.a. Utiliser uniquement des bouteilles de gaz CAUSER UN INCENDIE comprimé contenant le gaz de protection OU UNE EXPLOSION. correct pour le processus utilisé ainsi que des régulateurs fonctionnant correctement conçus pour le gaz et la pression utilisés.
  • Page 30 AC-225-S & AC/DC 225/125 TABLE DES MATIÈRES...
  • Page 31: Installation

    AC-225-S & AC/DC 225/125 INSTALLATION INSTRUCTIONS DE AVERTISSEMENT FONCTIONNEMENT Orifice Supérieur avec AVERTISSEMENT Câble plus Long Câble d'électrode • Faire réaliser lʼinstallation et lʼentretien de cet appareil par un électricien. • Éteindre lʼalimentation dʼentrée au niveau de la boîte à...
  • Page 32 AC-225-S & AC/DC 225/125 INSTALLATION 6. Faire glisser la poignée à sa place et la fixer en faisant Fixation du Câble de Travail sur la Pince tourner la vis de blocage vers lʼintérieur jusquʼà ce quʼelle Insérer le câble de travail (avec une terminale à orifice de soit serrée.
  • Page 33: Guide De Sélection Dʼélectrodes

    AC-225-S & AC/DC 225/125 FONCTIONNEMENT Choix de la Polarité de Soudage Choix des Électrodes Quelle électrode est la meilleure pour un travail particulier... Pour obtenir les meilleurs résultats avec les électrodes de comment lʼutiliser ? Ce sont là des questions importantes car le soudage à...
  • Page 34: Guide Des Électrodes

    AC-225-S & AC/DC 225/125 FONCTIONNEMENT GUIDE DES ÉLECTRODES Outre les électrodes mentionnées ci-dessus, celles qui figurent dans la liste suivante peuvent également être utilisées. Pour déterminer le diamètre correct de l’électrode et les réglages de courant à utiliser, consulter le Répertoire de Soudage de Lincoln (Bulletin No. C2.10).
  • Page 35 AC-225-S & AC/DC 225/125 FONCTIONNEMENT Coupage (Ne pas dépasser le Facteur de Marche – Au début de cette Section de Fonctionnement) La soudeuse à lʼarc et lʼélectrode peuvent être utilisées pour couper lʼacier et la fonte. Suivre cette procédure : 1.
  • Page 36: Entretien

    AC-225-S & AC/DC 225/125 ENTRETIEN ENTRETIEN Aucun entretien préventif de routine n’est requis. Contacter l’Atelier de Service sur le Terrain Agréé par Lincoln le plus proche pour les réparations nécessaires.
  • Page 37 On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice.

This manual is also suitable for:

Ac/dc 225/125

Table of Contents

Save PDF