To Play Only Desired Tracks/Discs - Pioneer PD-M801 Operating Instructions Manual

——
TO PLAY ONLY DESIRED TRACKS/DISCS
1 3 2
aa aaaaa eo
[ ___]) a |Bee8ee
aaa oa
I
D
— =F
5
1 PGM
ee ee
2 f=) 3)
DISC NUMBER
eae [ec
DISC NUMBER
osc 2 [pisc 3
jy
After approx.10
= roa seconds
My Tif i 2M9 we
ir ee Ber aes
ce
MULTI MEMORY
STORE
fp
® To store the program in multi-memory
Wait for about 10 seconds after programming. "MULTI-MEM?"
appears on the display. When you want to immediately store the
program in multi-memory, press MULTI MEMORY STORE.
e@ You can also store the program in multi-memory after program
playback. See "MULTI-MEMORY" on page 20.
14
<PRB1174>
En
Program playback - To program tracks/discs
in desired order
Only during stop mode, Disc programming is possible. Also, the
dialog display appears in each step to facilitate programming.
Track programming is possible during stop or playback mode.
However, <@ or BI cannot be used to select tracks during playback
mode. Select stop mode or playback mode before programming.
1 Press PGM.
e@ "DISC?" appears on the display.
2 Press the DISC NUMBER button which contains
the track to be programmed.
To program entire discs, enter the desired disc numbers with
the DISC NUMBER buttons and go to step 4. Make sure that
the player is in stop mode for Disc programming.
e@ When DISC NUMBER is pressed, "TRACK?" appears on the
display.
3 Enter the track No. to be programmed with the
Digit buttons.
Only during stop mode, you can use k@é<@ or Pt button. After
selecting the track No., press PGM.
4 Repeat steps 2 and 3 to program other tracks.
5 Press >.
The tracks are played in the programmed order. When all
programmed tracks have been played, the player enters stop
mode.
NOTE:
When the track is selected with é<@ or BI in step 3, the displayed
track No. is automatically programmed if é< or BPI is not pressed
within 2 seconds. Therefore, be sure to press é<¢ or Pi sequentially
until the desired track No. appears on the display.
To stop Program playback, press Ml.
e@ Programs containing up to 40 steps can be created.
@ To go to the previous or next step in a program, press ké<d or
PP.
e To enter track No. 11 or above with the digit buttons, see
"Track Search" on page 12.
e lf the magazine is in the player, the program contents will not
be erased even if the power is turned off.
NOTE:
During Delete programming or Time fade editing the PROGRAM
button cannot be operated.
Direct program
During normal playback or Magazine Hi-Lite Scan playback, the track
being played can be programmed.
1. Press the PROGRAM button to enter the program mode.
2. To search for a desired track during normal playback, itis possible
to skip to succeeding tracks by pressing Me<d, PPI, <4 or PP
button. Also, Magazine Hi-Lite Scan function can be used to move
from track to track through the disc.
3. If you wish to program the track currently playing, press the
PROGRAM button while the track is playing.
e@ Direct programming is not possible during program playback.