MULTI-PLAY COMPACT DISC PLAYER
Thank you for buying this Pioneer product,
Please read through these operating
will know how to operate your model properly.
have finished reading the instructions,
put them away in a
safe place for future reference.
in some countries or regions, the shape of the power plug
and power outlet may sometimes
differ from that shown in
connecting and operating the unit is the same.
To PREVENT FiRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
[For U.S. and Canadian
The serial number for this equipmentis located on the rear panel.
Please write "_hlsserial number on your enclosedwarranty card
andkeep it in a securearea. This is for your security.
of the EC (European Community)Directive 87/308/EEC."
THE POWER SWITCH IS SECONDARY CONNECTED AND ]
THEREFOREDOES NOT SEPARATE THE UNIT FROM MAINS
POWERIN STANDBY POSITION.
Only multi-voltage models are providKI with this switch.
U.S., Canadian, European, U.K., and Australian
are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.
Never use this model with 110V setting in Saudi Arbia.
The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the factory,
the switch is set to the power requirements of the player's
Check that it is set properly before plugging
the power cord into the outlet. If the voltage is not properly
set or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows:
• Use a medium-sized
(flat blade) screwdriver.
tip of the screwdriver
into the groove of the selector
switch and turn it so that the power voltage making of
your area points to the arrow.
The Art of Entertainment
VOLTAGE SE LECTOR