Time Display - Pioneer PD-M801 Operating Instructions Manual

Multi-play compact disc player
Table of Contents

Advertisement

Timer playback
By using a commercially available audio timer, it is possible to
initiate playback at any time automatically.
1. Insert a magazine into the magazine slot.
2. Set the time at which you wish playback to begin.
The timer
will supply power to both the amplifier and the player at the
preset time, turning all the components on and initiating the
playback mode.
Playback starts from the first track on the first
disc.
e@ When
Multi Program
Memory
(or Multi Delete Memory)
is
activated, the player enters corresponding
program
playback
mode at the preset time.
e Timer setting should be set while the power is turned on.
If
the timer is set while the power is turned off, timer playback
cannot be carried out.
Last address playback
When mis pressed or the power is turned off, the player memorizes
the point at which playback was stopped. Therefore, playback can be
resumed at that point.
1. When @ is pressed during normal playback, the player enters
standby mode for Last address playback. (Even when the power
is turned off, the player enters this mode.)
j=}
[eal
fr]
Ca)
[x]
Coa}
[ey
2. Press ».
Playback starts with fade-in from the nearby point at
which playback was stopped. (When the power is turned off, turn
on the power, and then press >.)
NOTE:
¢
if the play stops at the beginning or end of the track, the play
sometimes starts from the different track.
@ /f the program operation or edit operation is performed, or Ké<¢ or
PI button is pressed, the standby mode for Last address playback
is canceled.
To cancel standby mode for Last address playback:
Press ™ twice. The player returns to the beginning of the first track
on the disc at which playback was stopped.
When mis pressed twice and then @ is pressed again, the player
returns to the beginning of the first track on the first disc in the
magazine.
BASIC OPERATION
Time display
During playback, pressing the TIME button changes the time display
in the following sequence:
® Time (elapsed playback time of the
track being played) > ® Remain (remaining playback time of the
track being played) -> © AL Remain (remaining playback time from
the playing point to the end of the disc being played) + © Total
(Displays the total playback time of each disc(1-6), every time TIME
button is pressed).
@
With track No. 24 or more, Remain time ® cannot be displayed.
e@ During random playback or delete random playback, program,
playback or, delete playback, AL Remain
time © cannot be
displayed.
e
During time fade playback, the remaining playback time until
the playback stops with a fade-out can be displayed with the AL
Remain setting ©.
e
During Program playback, the number of program steps can be
displayed with thé Total setting O.
®
11
<PRB1174>
En

Advertisement

Table of Contents
loading

Table of Contents