Table of Contents
Advertisement
r
IMPORTANT 1
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructionsin the
literature accompanying the appliance.
| IMPORTANT 2
If the apparatus is fitted with AC mains power outiet(s),
see REAR PANEL FACILITIES forconvenient connection
of additional Hi-Fi component(s). Make all connections
tothe AC outlet(s} and the signal terminals first. Connect
the plug to the wall socket last (make sure that the
power switch is off.)
FOR USE IN THE UNITED
KINGDOM
The wires in this mains
lead are coloured
in
accordance with the following code:
Biue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured making
identifying the terminals in your plug proceed as follows:
WATER AND MOISTURE - The appliance should not
be used near water — for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet base-
ment, or near a swimming pool, etc.
POLARIZATION - If your purchased product is pro-
vided with a polarized power plug, please read the
following instructions. This product is equipped
with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug
will fit into the power outlet only one way. This isa
safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. if the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
POWER LINES
- An outdoor antenna should be located
away from power lines.
NONUSE PERIODS - The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
OBJECT AND LIQUID ENTRY - Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings.
DAMAGE
REQUIRING SERVICE ~ The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
The power-supply cord or the plug has been dam-
aged.
Objects have fallen, or liquid has been spilled into
the appliance.
The appliance has been exposed to rain.
The appliance does not appear to operate normally
or exhibits a marked change in performance.
The appliance has been dropped or the enclosure
damaged.
SERVICING - The user should not attempt to service
the appliance
beyond
that described
in the
operating instructions.
All other servicing should
be referred to qualified service personnel.
ELECTRIC
SERVICE
FIG. A
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or col-
oured black.
The wire which is coloured brown must be connected to
the terminal whichis marked with the letter L or coloured
red,
Donotconnect either wire to the earth terminal of a three
pin plug.
Equipment sold in the U.K. is not supplied with a
power plug.
OUTDOOR ANTENNA GROUNDING - If an outside
antenna is connected to the antenna terminal, be
sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges.
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection
to grounding
electrodes,
and
requirements for the grounding electrode. See Fig.
A.
CART ~ An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
NEC — NATIONAL ELECTRIC CODE
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 - 20)
GROUNDING CONDUCTORS
(NEC SECTION 810 — 21}
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
2
<PRB1174>
En
Advertisement
Table of Contents
