Pioneer PD-M801 Operating Instructions Manual page 13

VARIOUS OPERATIONS
Random playback - To play all tracks in
random order
| RANDOM PLAY
The RANDOM indicator lights and all tracks on all discs are played
in a random order.
To play tracks other than the deleted tracks in a random order,
press RANDOM PLAY after carrying out the Delete Program
procedure. See "Delete Program Playback" on page 16.
Magazine Hi-Lite Scan
During stop mode
HI-LITE SCAN HI-LITE
SCAN
When HI-LITE SCAN is pressed once during stop mode, playback
starts from a point 1 minute after the beginning of the first track, and
the first track of each disc is played for about 10 seconds. The DISC
SCAN indicator is blinking during Disc Scan mode. After the first
tracks of all discs are scanned, the player enters stop mode.
When HI-LITE SCAN is pressed twice during stop mode, playback
starts from a point 1 minute after the beginning of the track, and each
track is played for about 10 seconds. The SCAN indicator is blinking
during Track Scan mode. After all tracks of all discs are scanned, the
player enters stop mode.
To exit Magazine Hi-Lite Scan mode
Press t@, >, DISC NUMBER (DISC1 - DISC6) or digit buttons ( 1] - 1,
FFI0), 2201). When » is pressed, normal playback starts from the
current point. When DISC NUMBER or TRACK NUMBER is pressed,
the selected disc or track is played from the beginning.
NOTES:
@ Hi-Lite Scan can be carried out from the desired elapsed
time of the track. During playback, press HI-LITE SCAN at the
point you want to start Hi-Lite Scan playback. The player
memorizes the minute and second of the point and Track
Hi-Lite Scan playback is carried out from the memorized minute
and second on each track.
e@ Each time HI-LITE SCAN is pressed, the mode switches between
Disc Scan and Track Scan.
@ Programming of only desired tracks is possible during Track
Hi-Lite Scan playback. See "Direct program'.
@ During Track Hi-Lite Scan playback, you can skip to the desired
track with Kd or PI.
@ When REPEAT is pressed, Hi-Lite Scan playback will be
repeated.
@ When playback time of a track is less than one minute or is shorter
than memorized time, Hi-Lite Scan playback is carried out from the
beginning of the track for about 10 seconds.
When playback time of a track is less than 10 seconds, the track
is played from the beginning to the end.
Adjusting the sound volume
= OUTPUT LEVEL
0 a |
/)
Press OUTPUT LEVEL "—" or "+" to adjust the output level. The
output level can be adjusted between 0 dB and —25 GB in steps of
1B.
e The display shows the selected level.
@ The output level at the OUTPUT jacks and PHONES jack will be
adjusted simultaneously.
e If the magazine is in the player, the setting of the OUTPUT
LEVEL controls is not erased even when the power is turned
off.
When the magazine is ejected, the setting of the OUTPUT
LEVEL buttons is reset to 0 dB.
ADLC (Automatic Digital Level Controller)
When the difference of recording level between discs is noticeable,
the volume level should be adjusted for each disc, especially during
program playback or random playback whose tracks are selected
between 2 discs or more. Insuch cases, pressing ADLC automatically
sets the output level to the proper level, decreasing high output level.
When ADLC is turned on, the ADLC indicator lights.
e ToturnoffADLC, press ADLC so that the ADLC indicator goes off.
e Withsome selections, sound becomes unnatural. In such cases,
turn off ADLC.
ADLC F ADLC
e The setting of the OUTPUT LEVEL buttons are canceled when
ADLC is turned on.
@ When ADLC is turned on, the OUTPUT LEVEL buttons cannot be
operated.
0
13
<PRB1174>
En