Pioneer PD-M801 Operating Instructions Manual page 20

MULTI-MEMORY
e@ Multi-'Memory function cannot be carried out with the single
disc magazine.
Multi-Memory function can store the program and/or music type of
the magazine with disc* data.
Once a program and/or music type is stored in the memory, the
program and/or music type will be recalled whenever the magazine
is inserted. Up to 40 program steps for a magazine, and up to 32
delete programs (tracks) for a disc can be stored in Multi-Memory.
* Every CD disc is provided with a section called TOC (Table Of
Contents} at the beginning of the disc. The TOC section is just
like the table of contents (number of tracks, playing time, etc.)
of the disc.
Disc data memory
After a magazine is inserted, the player reads disc data of the first
disc and stores the disc data.
Flashes while storing the disc data
pec yreck many se
rent monn
Put UU aes
tor GIGS
©. 6. 6. ©. ©. ©. "ISS
For remaining discs, the player reads their disc data when the disc
starts playback.
Once the disc data are stored in the memory, the disc data will be
recalled whenever the same magazine is inserted, and the display
shows the total track numbers and total playing time of each disc
for about 2 seconds in the order of the disc numbers.
e@ When the Program or Delete Program and/or Music Type of the
magazine is already stored in Multi-Memory, the corresponding
indicator lights.
Music type
7 Cc OB ETE prOGM
[ea] eae
Bem)
=x|©@, €.6.6.6,.0° 15"
Program and/or music type indicator
NOTE
When using less than 6 discs, be sure to insert disc No.1 into the
magazine. Otherwise, the Multi-Memory function cannot be carried
out.
To correct the disc data
When replacing, adding or removing a disc (No.2 - No.6 only) from the
magazine whose disc data are already stored in Multi-Memory, insert
the magazine in the player and starts playback. The player clears the
previous disc data and stores new one in the memory when a change
is detected. In this case, disc No. 1 cannot be replaced, added or
removed.
20
<PRB1174>
En
To store program/delete program in multi-
memory
1
MULT] MEMORY
STORE
4
The corresponding program indicator lights.
==|©, ©,6.@.@,0°7I==
1. Insert the 6 disc magazine, and perform a program. (See
"Program Playback" on page 14 and "Delete Program Playback"
on page 16.)
2. Press MULTI MEMORY STORE.
The MULTI MEMORY PROGRAM or DELETE indicator lights,
> Stee appears on the display and the program can be now
stored.
Whenever the magazine which contains the same discs in the
same order is inserted, pressing » initiates playback according
to the stored program.
e ue program can be stored only when the player is in stop
mode.
e@ In step 1, programming is possible without magazine. After
programming, insert the magazine.
To play discs without Program Memory:
After inserting the magazine, press m. The player exits Multi-
Memory mode and any playback mode can be selected.
To store new program:
After the magazine is inserted, press ™ and store the new program.
The program previously stored will be erased.
NOTE
@ The contents of the Multi-Memory are stored for about 1 month
even when the power cord is unplugged.
e Ifthe contents of the Multi-Memory are erased, "ALL CLEAR' will
appear on the display.