To Play Only Desired Tracks/Discs - Pioneer PD-M403 Operating Instructions Manual

TO PLAY ONLY DESIRED TRACKS/DISCS
2
3
4
6
i i
I m'
1,42 3 6
PROGRAM
PD-M423 only PGM
DISC
PD-M423 only
DISC 1 DISC 2 DISC 3
r--1 r--l r--1
DISC NUMBER
DISC4 DISC5 DISC6
I--'1 i_11--'1
TRACK/MANUAL
/7
PROGRAM
PD-M423 only
r-q
/'2
D
PGM
PLAY/PAUSE
EE)
F-2
PD-M423 only
1---1
I PROGRAM PLAYBACK - TO PROGRAM TRACKS/DISCS IN DESIRED ORDER
1. With the player stopped, press the PROGRAM
button, so that the PROGRAM indicator lights.
2. Use the DISC button or one of the DISC NUMBER
buttons to select the desired disc number.
The selected disc number will be displayed.
3. Then, press the _ _ or _ _ button to
select the desired track.
The selected track number will be displayed.
4. Finally press the PROGRAM button, or wait for
about two seconds; the program will be stored in
memory.
If the PROG RAM button is pressed after selecting only the
disc number, the 'AL" indicator will appear, indicating se-
lection of the 'Disc All Program' mode (the entire contents
of the disc is entered into the program as a single step).
While the 'AL' indicator is displayed, however, if the 14_
<P< or _ _ button is used to designate a track number
and the PROGRAM button is then pressed (or after two
seconds elapses), the selected track will be stored as that
program step.
5. Repeat steps 2, 3 and 4 to program other tracks.
6. Press the I_/11 button.
The tracks are played in the programmed order. When all
programmed tracks have been played, the player enters
stop mode.
NOTE:
When a track is selected with the t44 _ or _,,_ _l button
in step 3, the displayed track No. is automa tically programm ed
if the I_ _ or JH_ _ button is not pressed within 2
seconds. Therefore, be sure to press the _ <P_ or
_lbutton sequentially until the desired track No. appears on
the display.
To stop Program playback, Press the • button.
To exit program mode:
During program playback, select a DISC No. with the DISC
NUMBER button and then press the I_/11button. The player
enters normal playback mode and playback starts from the
beginning of the selected disc.
• Programs containing up to 32 steps can be created.
• To go to the previous or next step in a program, press the
P<< ,<_ or _ _1 button.
• If the magazine is in the player, the program contents will
not be erased even if the power is turned off.
NOTE:
During Delete programming the PROGRAM button cannot
12
<PRB1205>