SCSI signal before sending it to the target device. By regenerating the SCSI signals, the
distance between the host and device can be extended by several meters.
SCSI Bus Isolator
ATTO SCSI Sidekick also has the ability to isolate the SCSI bus. In many workgroup
environments, the entire system is forced to shut down to remove a SCSI device. In the
event you need to upgrade or remove a device from the system, ATTO SCSI Sidekick
allows you to disconnect the device from the host without interruption or downtime. By
simply flipping the bus-enabled switch to the down position, the bus segment is
isolated.
ATTO SCSI Sidekick
Enabled
Disabled
Plug and Play
Start working fast. ATTO SCSI Sidekick's plug and play technology eliminates
configuration worries. Simply install ATTO SCSI Sidekick between your host and
device, terminate, and you are ready to work!
Page 2
Power
Bus
Enabled
Figure 1-1: Front View of ATTO SCSI Sidekick
Figure 1-2: Back View of ATTO SCSI Sidekick
5 Volt
DC
ATTO Technology, Inc.