Advertisement
ASSEMBLY INSTRUCTIONS
BLENDING ATTACHMENT
Align the motor body housing with the blending shaft, and push the
pieces together until you hear and feel them click and connect. If they
don't easily connect, just pull the housing and blending shaft slightly
apart, rotate the shaft a little, push the pieces together again, and
listen for the click.
CHEF'S WHISK ATTACHMENT
1.
Align the end of the whisk (A) with the
small opening of the whisk gearbox (B).
2.
Push end into opening until it locks into
position (C).
3.
Align the motor body with the whisk
assembly, and push the gearbox and
motor body together until you hear and
feel them click and connect. If they don't
easily connect, just pull the housing
and whisk gearbox slightly apart, rotate
the whisk assembly a little, push the
pieces together again, and listen for the
click.
CHOPPER ATTACHMENT
1.
Place the chopping blade in the center of the work bowl over
the metal blade shaft.
2.
Place the chopper lid onto the work bowl. Align the chopping
blade with the bottom of the chopper lid and turn the lid
clockwise to lock into place. You will feel and hear a slight click.
3.
Place the motor body housing on top of the chopper bowl lid
and lock into place. You will feel and hear a slight click, and that
means the unit is ready for operation.
Fig. 1
Fig. 2
7
A
B
Fig. 3
C
Advertisement
