Before The First Use - Zanussi ZOB 382 User Manual

Thermostat Control Knob
Turn the thermostat control knob clockwise to
select temperatures between 50°C and 250°C.
Thermostat Control Light
The thermostat control indicator will come on
when the thermostat control knob is turned. The
indicator will remain on until the correct
temperature is reached.
It will then cycle on and off to show the tempera-
ture is being maintained.
Safety Thermostat
To prevent dangerous overheating (through in-
correct use of the appliance or defective com-

Before the First Use

Remove all packaging, both inside and out-
side the oven, before using the oven.
WARNING!
To open the oven door, always hold the handle
in the centre.
ponents), the oven is fitted with a safety
thermostat, which interrupts the power supply.
The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat trigger due to in-
correct use of the appliance, it is enough to
remedy the error after the oven has cooled
down; if on the other hand, the thermostat trig-
gers because of a defective component, please
contact Customer Service.
The cooling fan
The oven is provided with a cooling fan, meant
to keep the front panel, the knobs and the oven
door handle cool.The fan switches on
automatically when the oven is activated. Warm
air is blown out through the aperture near the
oven door handle. The fan switches off when,
after cooking, the oven function control knob is
set to OFF position "0".
Before using for the first time, the oven should
be heated up without food.
35