Zanussi ZOCNX3XL, ZOCNX3XR - Electric Oven Manual

INSTALLATION

PRODUCT DESCRIPTION

1. Control panel
2. Knob for the heating functions
3. Power lamp / symbol
4. Display
5. Control knob (for the temperature)
6. Temperature indicator / symbol
7. Heating element
8. Lamp
9. Fan
10. Shelf support, removable
11. Shelf positions

CONTROL PANEL

Sensor fields / Buttons

	To set the time.
	To set a clock function.
	To set the time.

Display

1. Clock functions
2. Timer

BEFORE FIRST USE

The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.

1. Set the clock
   1. - press to set the time.
      After approximately 5 sec., the flashing stops and the display shows the time.
2. Clean the oven
   1. Remove all accessories and removable shelf supports from the oven.
   2. Clean the oven and the acces‐ sories only with a microfibre cloth, warm water and a mild detergent.
3. Preheat the empty oven
   1. Set the maximum temperature for the function: .
      Time: 1 h.
   2. Set the maximum temperature for the function: .
      Time: 15 min.

Turn off the oven and wait until it is cold. Place the accessories and the removable shelf supports in the oven.

DAILY USE

How to set the heating function

1. Turn the knob for the heating functions to select a heating function.
2. Turn the control knob to select the tem‐ perature.
3. When the cooking ends, turn the knobs to the off position to turn off the oven.

Heating functions

Heating function	Application
0 Off position	The oven is off.
Light	Oven lamp
True Fan Cooking	Even baking, tender‐ ness, drying
Moist Fan Baking	Baking
Defrost	Defrosting
Grill	Toasting, grilling
Fast Grilling	Toasting, grilling
Turbo Grilling	Roasting meat, making gratin, browning

Notes on Moist Fan Baking

The oven door should be closed during cooking so that the function is not interrupted and the oven operates with the highest energy efficiency possible.

For general energy saving recommendations refer to "Energy Efficiency" chapter, Energy Saving.

This function is designed to save energy during cooking. When you use this function, the temperature in the cavity may differ from the set temperature. The heating power may be reduced.

CARE AND CLEANING

Notes on cleaning

	Clean the front of the appliance only with a microfibre cloth with warm water and a mild detergent. Clean and check the door gasket around the frame of the cavity.
	Use a cleaning solution to clean metal surfaces.
	Clean stains with a mild detergent. Do not apply it on the catalytic surfaces.
	Clean the cavity after each use. Fat accumulation or other residue may cause fire.
	Moisture can condense in the appliance or on the door glass panels. To decrease the condensation, let the appliance work for 10 minutes before cooking. Do not store the food in the appliance for longer than 20 minutes. Dry the cavity only with a microfibre cloth after each use.
	Clean all accessories after each use and let them dry. Use only a microfibre cloth with warm water and a mild detergent. Do not clean the accessories in a dishwasher.
	Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.

How to use catalytic cleaning

There are catalytic panels in the cavity. Catalytic panels absorb fat during catalysis.

Spots or discolouration of the catalytic coating have no effect on the cleaning.

Before the catalytic cleaning

Turn off the oven and wait until it is cold.

Remove all accessories.

Clean the oven floor and the inner door glass with warm water, soft cloth and mild detergent.

Clean the appliance with catalytic cleaning

1. Set the function and the oven temperature: 250°C
   Duration: 1 h
2. After cleaning, turn the knob for the oven functions to the off position.
3. When the oven is cold, clean the cavity with a wet soft cloth.

TROUBLESHOOTING

What to do if...
In any cases not included in this table please contact with an Authorised Service Centre.

Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

We recommend that you record the following data:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

ENERGY EFFICIENCY

Product Information and Product Information Sheet

Energy saving

The appliance has features which help you save energy during everyday cooking.

Make sure that the appliance door is closed when the appliance operates. Do not open the appliance door too often during cooking. Keep the door gasket clean and make sure it is well fixed in its position.
Use metal cookware to improve energy saving.
When possible, do not preheat the appliance before cooking.
Keep breaks between baking as short as possible when you prepare a few dishes at one time.

Cooking with fan
When possible, use the cooking functions with fan to save energy.

Residual heat
When the cooking duration is longer than 30 min, reduce the appliance temperature to minimum 3 - 10 min before the end of cooking. The residual heat inside the appliance will continue to cook.
Use the residual heat to warm up other dishes.

Keep food warm
Choose the lowest possible temperature setting to use residual heat and keep a meal warm.

Moist Fan Baking
Function designed to save energy during cooking.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging away from children and dispose of it appropriately.
• 
  Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts become hot.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• If the appliance has a child safety device, it should be activated.
• This appliance is for cooking purposes only.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
• 
  The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
• Always use oven gloves to remove or put in accessories or ovenware.
• Always cook with the oven door closed.
• To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence (if applicable).
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
• 
  Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
• Use only the food sensor (core temperature sensor) recommended for this appliance (if applicable).

Installation and Electrical connection

Only a qualified person must install and connect this appliance.

Follow the installation instructions supplied with the appliance.
Install the appliance in a safe and suitable place that meets installation requirements.
Do not use the appliance before installing it in the built-in structure.
Keep the minimum distance from other appliances and units. Before mounting the appliance, check if the oven door opens without restraint.
Do not install or use a damaged appliance.
Remove all the packaging.
Always take care when moving the appliance as it is heavy. Do not pull the appliance by the handle. Always use safety gloves and enclosed footwear.
The appliance is equipped with an electric cooling system. It must be operated with the electric power supply.

Risk of fire and electric shock.

Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
The appliance must be earthed. Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
This appliance is supplied without a main plug and a main cable.
Do not let mains cables touch or come near the appliance door or the niche below the appliance, especially when it operates or the door is hot.
Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
For the section of the cable refer to the total power on the rating plate. You can also refer to the table:

Use and Maintenance

Risk of injury, burns, electric shock, fire, explosion or damage to the appliance.

Do not change the specification of this appliance.
Do not let the appliance stay unattended during operation. Deactivate the appliance after each use.
Make sure that the ventilation openings are not blocked.
If the appliance is installed behind a furniture panel (e.g. a door) make sure the door is never closed when the appliance operates. Heat and moisture can build up behind a closed furniture panel and cause subsequent damage to the appliance, the furniture or the floor. Do not close the furniture panel until the appliance has cooled down after use.
Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
Do not operate the appliance with wet hands or when it has contact with water.
Do not apply pressure on the open door. Be careful when you remove the door from the appliance. The door is heavy.
Do not use the appliance as a work surface or as a storage surface.
Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
When you place food into hot oil, it may splash.
Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air.
Do not let sparks or open flames to come in contact with the appliance when you open the door.
Do not share your Wi-Fi password (if applicable).

To prevent damage or discoloration to the enamel:

• do not put ovenware or other objects in the appliance directly on the bottom.
• do not put aluminium foil directly on the bottom of cavity of the appliance.
• do not put water directly into the hot appliance.
• do not keep moist dishes and food in the appliance after you finish the cooking.
• be careful when you remove or install the accessories.

Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
Discoloration of the enamel or stainless steel has no effect on the performance of the appliance.
Clean regularly the appliance to prevent the deterioration of the surface material.
Before maintenance, deactivate the appliance and disconnect from the mains. Do not clean the catalytic enamel (if applicable) with detergents.
Make sure the appliance is cold. There is the risk that the glass panels can break. Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
Do not clean the catalytic enamel with detergents (if applicable).
If you use an oven spray, follow the safety instructions on its packaging.
Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
Use only lamps with the same specifications.
This product contains a light source of energy efficiency class G.
To repair the appliance contact the Authorised Service Centre. Use original spare parts only.

zanussi.com
zanussi.com\register
Get usage advice, brochures, trouble shooter, service and repair information at zanussi.com/support

Documents / Resources

References

• Zanussi - Zanussi.com
• Zanussi - Zanussi.com

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Zanussi ZOCNX3XL, ZOCNX3XR - Electric Oven Manual