Trouble Shooting; Repairs; Safety Procedures - probst PW-III Operating Instructions Manual

Maintenance and care
5.2

Trouble shooting

ERROR
The pallet cart cannot be
raised
The pallet cart cannot be
lowered
The pallet cart is difficult
controllable.
5.3

Repairs

Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by a qualified person or an expert.
5.4

Safety procedures

•
It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (→ DGUV norm 100-500).
•
The corresponding legal regulations and the regulations of the declaration of conformity must be
observed!
•
The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at:
•
We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert inspection" in a
clearly visible place (order no.: 2904.0056+Tüv sticker with year number) after the inspection has
been done.
The check by an expert must be proved!
Device Year
51100011
CAUSE
Valve is opened
Valve defective
Steering bearing is defective.
Tyre pressure is to low.
service@probst-handling.de
Date
REPAIR
Close valve (lever II)
Check valve (lever II) and exchange it if
necessary.
Check the steering bearing.
Check tyre pressure.
Expert
11 / 12
Company
GB