Rev Type (Reverb Type); Rev Time (Reverb Time); Pc Ch= (Transmit Program Change) - Yamaha DTX Owner's Manual

14 REV Type (reverb type)

Various reverbs from hall to room are available
to add dimension to the voice. The Reverb
Type can be set for each drum kit.
Assign one of the reverb types by rotating the
Data Scroll Wheel or using the +1/YES and -1/
NO buttons. The following reverb types are
available:
none .............. No effect (dry sound).
hall 1 ............ Small hall.
hall 2 ............ Large hall.
room 1 .......... Small room.
room 2 .......... Large room.
room 3 .......... Room with a high ceiling.
stage 1 .......... Large stage.
stage 2 .......... Small stage.
plate ............. Steel plate reverb.
white ............ A special short reverb effect.
tunnel ........... A reverb effect similar to playing in a
tunnel.
canyon .......... A fantastic reverb effect similar to playing
in a canyon.
basemnt ........ A reverb effect similar to playing in the
basement with short reflection.
MISC.
CYMBAL
SNARE
KICK
Settings:
none, hall 1, hall 2, room 1, room 2, room 3, stage 1,
stage 2, plate, white, tunnel, canyon, basemnt
(basement)
Feature Reference — Drum Kit Voice Edit Mode

15 REV Time (reverb time)

This determines the reverb length for each
drum kit.
Set the time by rotating the Data Scroll Wheel
or using the +1/YES and -1/NO buttons. The
larger the value, the longer the reverb time.
MISC.
CYMBAL
SNARE
KICK
Settings:
0 to 69

16 PC Ch= (transmit program change)

This sets the MIDI program change number to
be transmitted when the drum kit is changed.
You can specify different program change
numbers to channels 1 to 16. For example,
change the drum kit on the DTX to an external
synthesizer by selecting the voices on an
external tone generator. This can be set for each
drum kit.
! Move the cursor to the Program Change
Transmission Channel focus area and select
the transmission channel by rotating the
Data Scroll Wheel or using the +1/YES and -
1/NO buttons.
" Move the cursor to the PC= (program
change) focus area and rotate the Data Scroll
Wheel or use the +1/YES and -1/NO buttons
to set the program change number.
# Repeat steps ! and " to set the program
change for each of the 16 channels.
Program change transmission channel
Program
change
MISC.
CYMBAL
SNARE
KICK
Settings:
Program change transmission channel: 1 to 16.
Program change: off, 1 to 128.
59