Yamaha DTX Owner's Manual page 15

Using the AUX IN jack
The AUX IN jack (stereo mini jack) is located on the near panel. You can enter a sound source from a CD or cassette player
through this jack, mix it with the DTX sounds and send it out through the output jacks on the rear panel. This is convenient
when you practice a rhythm by playing to a tune or hold a band session. It is also posible to independently control the output
volume of the sound source coming in from the external device by using the AUX IN volume slider. By doing so you can
adjust the balance between the drum kits of the DTX and the external sound.
Mounting the Drum Trigger Series DT
! Bass Drum
Mount the DT10 Sensor (trigger) on the batterhead of the bass drum close to, yet not touching the edge of
the rim.
" Snare
Mount the DT10 Sensor (trigger) on the batterhead of the snare close to, yet not touching the edge of the
rim across the player.
# Toms
Mount the DT10 Sensor (trigger) on the shell, close to, yet not touching the rim. Place the triggers away
from the influence of other drums (snare or toms), hi-hat, and cowbells.
C Be sure to connect the audio devices before turning all the related devices ON.
5 TOM4 5 TOM4 4 TOM3 4 TOM3 3 TOM2 3 TOM2
PHONES PHONES AUX IN AUX IN FOOT SW FOOT SW
MASTER VOL. MASTER VOL.
AUX IN jack
Sticky tape
MAX MAX
MIN MIN
AUX IN AUX IN ACCOMP ACCOMP CLICK CLICK
SNARE/CYMBAL SNARE/CYMBAL KICK/MISC. KICK/MISC.
Sticky tape
11