Linkmode; Lrn Mode (Learn Mode) - Yamaha DTX Owner's Manual

3 LinkMode

This function applies the trigger related data of
drum kit number 1 to any selected drum kit.
If the input data is unique to each drum kit,
it may be necessary to reconnect the pads.
By using LinkMode, you can always use the pad
velocity or note number assignment in the same
way as in drumkit 1 and play by changing the
drum voice assignments of the drum kits.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select LinkMode. The
following 2 modes are available.
global ..................... Always applies the following trigger
input setting data of drum kit
number 1. The data of the output
voice is not linked and therefore, it is
possible to set this mode
independently.
PAD Type, PAD Gain, Level Range, Velocity Range,
Velocity Curve, Self Rejection, Specified Rejection, Pad
Function, FS Function, FS MIDI Channel, FS Control-
change Number, FS HH Close-Velocity, FC Function, FC
MIDI Channel, FC Control-change Number, FC
Sensitivity, HH Control Input
indiv (individual) .. The trigger input data set for each
drum kit will be used.
MISC.
CYMBAL
SNARE
KICK
Settings:
global, indiv
A When this parameter is set to "global" and you edit a
drum kit other than drum kit number 1 in Drum Kit Trigger Edit
Mode, You will automatically change the contents of both that
drum kit and drum kit number 1.

4 Lrn Mode (learn mode)

This function enables you to select the input
jack number or MIDI note number by hitting a
pad when you are editing in Drum Kit Trigger
Edit mode or Drum Kit Voice Edit mode,
respectively.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select Learn mode. The
following 3 modes are available.
always ........... In Drum Kit Trigger Edit mode, the input
jack number of the pad that is connected
will appear on the LCD each time you play
a pad. In Drum Kit Voice Edit mode, the
MIDI note number assigned in Drum Kit
Trigger Edit mode will appear on the LCD
each time you play a pad.
w/shift .......... You can set the input jack number or MIDI
note number in the same manner as above
by playing a pad while holding SHIFT.
off ................. The Learn mode will not function. Select
the input jack number or MIDI note
number manually.
MISC.
CYMBAL
SNARE
KICK
Settings:
always, w/shift, off
Feature Reference — Utility Mode
115