Setting The Reverb On/Off; Setting The Reverb Type - Yamaha DD-65 Owner's Manual

CO1
Different depths of the DD-65/YDD-60's reverb effect can be added to the DD-65/YDD-60's overall
sound.
Lamp is on
rbt
5
Save to a Custom kit.
Press the [ASSIGN] button to save to a Custom kit (the lamp will be
off).
To cancel the saving, simply press the [KIT], [SONG] or [DEMO]
button.
After you've assigned the voice, the instrument will automatically be
set to the assigned custom kit.
You can now play the voice you have assigned to the pad/pedal.

Setting the Reverb ON/OFF

1
Press the [REVERB] button.
When you press the [REVERB] button the button's lamp lights, and
the ambience of a room or concert hall is added to the sound.
2
To turn Reverb off, press the [REVERB] button
again. (Make sure that the lamp is not lit.)

Setting the Reverb type

1
Enter the Reverb type setting function.
Press the [FUNCTION] button once, then press the [DRUM 1] or
[DRUM 2] button a number of times until the "rbt" item appears.
The currently selected Reverb type number appears next to the "rbt"
indication.
2
Change the reverb type by turning the DIAL.
●
Reverb type List
No. Reverb Type
1 Hall 1
2 Hall 2
3 Hall 3
4 Room 1
5 Room 2
3
Press the [FUNCTION] button to exit from the
Function mode.
Play the Pads/Pedals
No. Reverb Type
6 Stage 1
7 Stage 2
8 Plate 1
9 Plate 2
10 Off
DD-65/YDD-60 Owner's Manual
17