Setting Up - Yamaha DTX Owner's Manual

Setting Up

Setting Up with Pads Only
Connect each pad to the proper DTX input jack as shown below:
(This illustration is an example of the pads, triggers and devices that can be connected to the DTX. Refer to
P.8 for the types of pads or triggers that can be connected to each input jack.)
Additional Pads TP80,etc.
AC Power Adaptor
Audio output
A To further add a pad, use a conversion cable (which separates the stereo plug to two monaural plugs) for INPUT 10/9 and 12/11 which enables
you to enter two different trigger signals. For most preset drum kits, a cupped cymbal voice is set to INPUT 10 and asuitable percussion voice for
each preset drum kit is set to INPUT 11 and 12.
To the pads
KP80,etc. TP80,etc. PCY80,etc.
INPUT ATTENUATION INPUT ATTENUATION
12/11 10/9 KICK 10/9 KICK
POWER POWER DC IN 12V DC IN 12V R
AUX OUT AUX OUT
CD Player,etc.
Headphones
Two monaural plugs
Conversion cable
PCY80,etc. TP80,etc. TP80,etc.
8 H.HAT 8 H.HAT 7 CRASH 7 CRASH 6 RIDE 6 RIDE 5 TOM4 5 TOM4 4 TOM3 4 TOM3 3 TOM2 3 TOM2 2 TOM1 2 TOM1
L R L/MONO L/MONO PHONES PHONES AUX IN AUX IN FOOT SW FOOT SW H.HAT H.HAT
OUTPUT OUTPUT CONTROL CONTROL
FS-50,etc.
HH80,etc.
Stereo plug
TP80,etc. TP80,etc. TP80,etc.
1 SNARE 1 SNARE
CONTRAST CONTRAST OUT OUT IN
MIDI MIDI
–
MIDIkeyboard,etc.
MIDI tone generator,etc.
To the DTX Input 10/9 or 12/11
9