Cc Ch= (Transmit Control Change: Pan); Cc Ch= (Transmit Control Change) - Yamaha DTX Owner's Manual

19 CC Ch= (transmit control change: pan)

This sets the pan position (of a stereo image) of
the MIDI control change sent when the drum
kit is switched. It is possible to set the volume
value for each of the channels 1 to 16. For
example, by switching the drum kit of the DTX,
you can set the pan position of a voice of an
external synthesizer to a specific value. These
parameters can be set for each drum kit.
! Move the cursor to the Control Change
Transmission Channel and select the
transmission channel using the Data Scroll
Wheel or the +1/YES and -1/NO buttons.
" Move the cursor to the Pan and set the value
using the Data Scroll Wheel or the +1/YES
and -1/NO buttons.
# Repeat steps ! and " and set the pan
position for each of the 16 channels.
Control change transmission channel
Pan
MISC.
CYMBAL
SNARE
KICK
Settings:
Control change transmission channel: 1 to 16
Pan: off, 0 (far left in a stereo image) to 127 (far right
in a stereo image)
Feature Reference — Drum Kit Voice Edit Mode

20 CC Ch= (transmit control change)

This sets the type (control change number) and
value of the MIDI control change data
transmitted when a drum kit is switched. It is
possible to set control change numbers
individually to each of the channels 1 to 16.
For example, by switching a drum kit, you can
set the sound parameters of external
synthesizers connected to the DTX. The data
can be set for each drum kit.
A Also refer to P.131 for further details regarding control
change data.
! Move the cursor to the Control Change
Transmission Channel focus area and select
the transmission channel by rotating the
Data Scroll Wheel or using the +1/YES and
-1/NO buttons.
" Move the cursor to the control change
number and select the number by rotating
the Data Scroll Wheel or using the +1/YES
and -1/NO buttons. This step selects the
type of control change data to transmit.
# Move the cursor to the data focus area and
set the parameter by rotating the Data Scroll
Wheel or using the +1/YES and -1/NO
buttons.
$ Repeat steps ! to # to set the control
change numbers and data parameters for
each of the 16 channels.
Control change transmission channel
Control
Change
Number
Data
MISC.
CYMBAL
SNARE
KICK
Settings:
Control change transmission channel: 1 to 16
Control change number: 0 to 119
Data: off, 0 to 127
61