Yamaha DTX400 Series Firmware Update Manual

Download this manual

Thank you for choosing a Yamaha product.

This document explains how to update the firmware of the DTX400K/430K/450K Drum Trigger Module

(hereinafter called "DTX400"), and provides the update history.

■Special Notices

・

This updater is designed for use with the DTX400, earlier than version 1.11.

・

This updater is to be used at the user's own risk.

・

A computer running one of the following operating systems is required for this update:

Windows7 32bit/64bit、Windows8.1 32bit/64bit、Windows 10 32bit/64bit

・

The update will take several minutes. Please ensure that your computer does not enter Sleep mode

during this time.

During the update, do not launch or operate any applications other than the updater on your computer.

・

DO NOT power off or disconnect the cable from the product during the updating process. The DTX400

may become inoperable.

・

If the update fails, and the DTX400 still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・

The company names and product names in this document are the trademarks or registered trademarks

of their respective companies.

DTX400 Series

Firmware Update Guide

DTX400 Series Firmware Update Guide

Page 1 DTX400 Series Firmware Update Guide Thank you for choosing a Yamaha product. This document explains how to update the firmware of the DTX400K/430K/450K Drum Trigger Module (hereinafter called "DTX400"), and provides the update history. ■Special Notices ・ This updater is designed for use with the DTX400, earlier than version 1.11.
Page 2 The number button lights will flash [1] → [1] → [1]. Updating the firmware is not necessary. After flashing is finished, the DTX400 will start in Normal mode (with the [KIT] button and one of the number buttons lit). DTX400 Series Firmware Update Guide...
Page 3 When the update process is completed, the message “Completed.” is shown on the display. Shut down the updater application on the computer. Confirm the version of the firmware as described in “Confirming the Current Version.” This completes the update process. DTX400 Series Firmware Update Guide...
Page 4 Fine tuned the trigger parameters for Snare Pads when the XP-series pad is selected. ・ Fixed other minor problems. Manual Development Group ©2017 Yamaha Corporation P u b l i s h e d 0 3 / 2 0 1 7 Y J - A 0 DTX400 Series Firmware Update Guide...