Entering Song Play Mode; Selecting A Song - Yamaha DTX Owner's Manual

Feature Reference — Song Play Mode

Entering Song Play Mode

Press the SONG button.
A You may inadvertently enter Song Job mode if you press the SONG button twice. Press the SONG button again to return to Song Play mode.
The modes will change alternately each time you press this button.
A The Song Play mode is displayed in the same format as the Drum Kit Play mode (or Chain Play mode).

Selecting a Song

! Use the Q cursor buttons to move the cursor to the song number focus area.
A The song number focus area automatically blinks in Song Play mode.
A It is also possible to move up and down the LCD using the PAGE ¡ or PAGE ⁄ buttons.
" Rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to select the song number.
The selected song will be set to a preset tempo.
The rhythm data of the current measure will appear in the form of small square dots on the LCD data focus
area. Refer to P.19, 87 for further details about the data focus area.
Selections:
Preset song: 1 to 100
User song: 101 to 130
A The section name of the current measure will appear on the far bottom of the LCD. If a user pattern is used in the current measure, the section
will not appear on the LCD.
94
DRUM KIT
DRUM DRUM
TRIGGER TRIGGER
KIT KIT
VOICE VOICE
CHAIN CHAIN
SONG SONG UTILITY UTILITY
MISC.
CYMBAL
SNARE
PATTERN TTERN STORE STORE
KICK
Song number
DRUM KIT
PAGE AGE PAGE AGE
ERASE
MAIN A MAIN B
FILL AB FILL BA
1/NO 1/NO 1/YES 1/YES
MISC.
INTRO ENDING
CYMBAL
SNARE
TEMPO TEMPO SHIFT SHIFT
KICK
Song number Song name
DRUM KIT
SONG
MISC.
CYMBAL
SNARE
KICK
TEMPO BEAT
MEASURE
SONG
CLICK
Song name
TEMPO BEAT
MEASURE
SONG
CLICK
Tempo
TEMPO BEAT
Beat
Measure number
MEASURE
CLICK
Click
Data focus area
Section