Midictrl (Midi Control); Syncmode (Synchronization Mode) - Yamaha DTX Owner's Manual

39 MIDIctrl (MIDI control)

This sets the DTX to transmit or receive system
real-time messages (start, continue, stop).
When this function is enabled, you can control
the external sequencers or rhythm machines
using the START/STOP button on the DTX
panel as well as control the DTX pattern or
song playback from an external sequencer.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to turn the function on or
off. When the function is on, it will transmit or
receive the system real-time messages. Turn the
function off when not in use.
MISC.
CYMBAL
SNARE
KICK
Settings:
off, on

40 SyncMode (synchronization mode)

This synchronizes the DTX with the external
MIDI devices such as the rhythm machine.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the SyncMode. The
following two modes are available:
int ................. Enables you to start/stop/continue/tempo
and synchronize the playback of an
external MIDI device from the DTX.
ext ................ Enables you to control the start/stop/
continue/tempo and synchronize the
pattern or song playback of the DTX from
an external MIDI device.
A Set the function to int if you are not playing in sync with
an external MIDI device.
A It is necessary to first enable the transmission/reception
of System Real-time Message (start/stop/continue).
MISC.
CYMBAL
SNARE
KICK
Settings:
int, ext
Feature Reference — Utility Mode
125