Rear Panel - Yamaha DTX Owner's Manual

Rear Panel

INPUT ATTENUATION INPUT ATTENUATION
POWER POWER
! POWER Switch (P.12)
Press this button to turn the DTX ON or OFF.
" INPUT ATTENUATION Switches
These switches adjust the input level when pads of
varying output levels are connected. The input level
increases when the switch is lowered. Try this when the
volume does not respond to the pad played or when a
double-triggering occurs to one tap.
# DC IN Jack (P.12)
Connect the AC adapter (Yamaha PA-1207, PA-3B or an
equivalent) included in this package.
A The Yamaha PA-3 CANNOT be connected.
$ 12/11 Input (P.9)
Connects with an optional pad. If you use a stereo phone
plug to connect the DTX and two pads, two triggers can
be input. If you use monaural phone plugs, only 11 is
available to use.
% 10/9 KICK Input (P.9)
Connects with an optional pad. If you use a stereo phone
plug to connect the DTX and two pads, two triggers can
be input. If you use monaural phone plugs, only 9 is
available to use.
& 1 SNARE to 8 H.HAT Inputs (P.9)
Connect stereo phone plugs to input from trigger or
switch type pads (Yamaha TP80S or PCY80S). Use a
monaural phone plug for plain trigger input.
A Plugging a monaural phone plug when the power is ON
may cause a reversed phase and the switch may malfunction. In
this case, turn the power OFF, reconnect the plug and turn the
power ON again.
' AUX OUT L and R Jacks
This jack is used to separately output specific sound(s)
such as the kick and snare. To assign a sound to these
output jacks, select the Output Port on the 12th page in
Drum Kit Voice Edit mode (P.12). To assign a
metronome click to these output jacks, set the SEQ
ClickOut on the 27th page in Utility mode (P. 58).
8
12/11 12/11 10/9 KICK 10/9 KICK 8 H.HAT 8 H.HAT 7 CRASH 7 CRASH 6 RIDE 6 RIDE
DC IN 12V DC IN 12V R L R L/MONO L/MONO
AUX OUT AUX OUT OUTPUT OUTPUT
5 TOM4 5 TOM4 4 TOM3 4 TOM3 3 TOM2 3 TOM2 2 TOM1 2 TOM1 1 SNARE 1 SNARE
PHONES PHONES AUX IN AUX IN FOOT SW FOOT SW H.HAT H.HAT CONTRAST CONTRAST
CONTROL CONTROL
( OUTPUT L/MONO and R Jacks (P.10)
Use these jacks to connect to external amplifiers or mixers
using a monaural phone plug. For monaural playback,
connect to L/MONO. For stereo playback, connect to
both L/MONO and R.
) PHONES Jack (P.9)
Connect a stereo headphone to this jack to monitor the
DTX.
* AUX IN Jack (P.11)
Use this jack to input data from an external audio device
using a miniature stereo phone plug. This is convenient
when you are playing to music from a CD or cassette
tape.
+ FOOT SW Jack (P.9)
Connect a footswitch (Yamaha FS50 or FC5) to this plug.
Select the footswitch function you want to use from the
19th FS Function page in Drum Kit Trigger Edit mode (P.
46).
, H.HAT CONTROL Jack (P.9)
Connect the hi-hat foot controller (Yamaha HH80 or
FC7) to this plug. You can use this as a MIDI controller
by changing the parameter on the 22nd Hi-hat Control
Function page in Drum Kit Trigger Edit mode (P. 47).
- CONTRAST Knob
This knob adjusts the contrast of the LCD.
. MIDI IN/OUT (P.9)
Use these connectors to send or receive MIDI data to or
from an external MIDI device. You can create a large
scale MIDI system by connecting the DTX to an external
MIDI tone generator or sequencer.
OUT OUT IN IN
MIDI MIDI